Table of Contents
Advertisement
631-205-105
Version 01, January 2009
Step 1: Insert the lifting cable sling connecting links securely through each of
the two lifting ears (Fig. 8). To prevent the cabinet from tipping when the
pallet brackets are removed, take up the slack with the crane. DO NOT
tighten the cables so that the pallet lifts. The weight of the pallet will
make it difficult to remove the bracket bolt.
SLINGS SHOULD BE
USED, ONE FOR EACH
EYEBOLT.
Step 2: If installed, use a 216-type tool to remove the OSP cable side base panel
of the battery chamber (Fig. 9).
Step 3: Remove the bolts from the pallet mounting bracket, which secures the
cabinet to the pallet.
Page 12 of 21
Fig. 8 : Lifting the Cabinet
Fig. 9 : Removing Battery Chamber Base Panel
Proprietary Information
Emerson Network Power
Wireline Products
SLINGS REQUIRED
MINIMUM LENGTH
8 FEET (2.4 m)
Outside Plant Equipment
Advertisement
Table of Contents
