Resume Playback; Selecting A View Angle; Selecting The Subtitle - JVC GVT0150-008A Instructions Manual

Advanced operations

Resume playback

When Resume Playback is set to "ON" (A pg. 40)
and you stop playback by the following operations,
the position where playback has been stopped is
stored. ("RESUME" appears on the display
window.)
• Turning off the power (A pg. 17)
• Pressing 7 once
• Changing the source (A pg. 18)
To start playback from the stored position
Press 3 (play button) or DVD.
• There may be a case where 3 (play button) does not work after
changing the source.
To clear the stored position
Press 7 again or open the disc tray with the playback disc.

Selecting a view angle

7 During playback of a disc containing multi-view
angles
When using the ANGLE button:
1
Press ANGLE.
Example:
The first view angle is selected out of 3 view angles recorded.
2
Press ANGLE repeatedly or press
Cursor Y/5 to select the desired view
angle.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
3
Press ENTER.
Dolby D
2/0 . 0ch
4
Press Cursor Y/5 to select the desired
view angle.
5
Press ENTER.
6
Press ON SCREEN.
The on-screen bar disappears.
NOTE
• During DVD AUDIO playback, this feature is available only for the
video part.
31

Selecting the subtitle

7 During playback of a disc containing subtitles in
DVD DVD DVD
several languages
VR
VIDEO AUDIO
When using the SUBTITLE button:
1
Press SUBTITLE.
Example (DVD VIDEO):
"ENGLISH" is selected out of 3 subtitle languages recorded.
2
Press Cursor Y/5 to select the desired
subtitle.
For DVD VR
• Pressing SUBTITLE activates the subtitles (subpictures)
regardless of whether the subtitles are recorded or not.
(subpictures will not change if no subpictures is recorded.)
DVD DVD
For SVCD
VIDEO AUDIO
• An SVCD can contain up to four subtitles. Pressing
SUBTITLE changes the subtitles regardless of whether the
subtitles are recorded or not. (Subtitles will not change if no
subtitle is recorded.)
NOTE
• To clear the subtitle, press SUBTITLE. Each time you press
SUBTITLE, subtitle appears and disappears alternately.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
3
Press ENTER.
.
4
Press Cursor Y/5 repeatedly to select
the desired subtitle.
5
Press ENTER.
6
Press ON SCREEN.
The on-screen bar disappears.
NOTE
• To clear the subtitle, press SUBTITLE. Each time you press
SUBTITLE, subtitle appears and disappears alternately.
• Some subtitle or audio languages are abbreviated in the pop-up
window. See "The language codes list" (A pg. 38).
• During DVD AUDIO playback, this feature is available only for the
video part.
See page 26 for button locations.
Dolby D
2/0 . 0ch
DVD DVD DVD
VR
VIDEO AUDIO
.