11.0 Servicing Policy - Datex-Ohmeda D-Tec Operation And Maintenance Manual

11.0 Servicing Policy

w
Warning: Only Technicians/Engineers trained and certificated by Datex-Ohmeda to repair and/or service
the Datex-Ohmeda D-Tec Vaporizer should attempt to repair and/or service it and it must be repaired
and/or serviced in accordance with written instructions provided by Datex-Ohmeda.
Repairs and service procedures must be performed at a Datex-Ohmeda Authorized Service Center. A
Datex-Ohmeda Service Representative can be contacted at the nearest Datex-Ohmeda Service Center or
Datex-Ohmeda Authorized Distributor.
The service includes the following:
1. Disassembly of certain components.
2. Cleaning.
3. Inspection for damage and wear.
4. Replacement of damaged and/or worn components.
5. Updating the D-Tec Vaporizer as appropriate.
6. Calibration check of the D-Tec Vaporizer.
7. Alarm and safety checks.
If the equipment is to be transported to the nearest Datex-Ohmeda Service Center, package the vaporizer
and mains cable securely for protection in its original packaging, and ship it prepaid.
Enclose the following items as applicable:
1. A letter describing in detail any difficulties experienced with the equipment.
2. Warranty information such as a copy of the invoice or other documentation.
3. Purchase order number to cover repair or service of equipment not under warranty.
4. Ship to and bill to information.
5. The name and telephone number of the person to contact.
This vaporizer requires servicing every two years.
Page 26
August 2001
2
D-Tec Vaporizer
O & M Manual Part No. 1107-0622-000