Table of Contents
Advertisement
Troubleshooting guide
PROBLEM
Vacuum cleaner will not op-
erate
Vacuum cleaner will not pick-
up or suction power is weak
Dust escaping from vacuum
cleaner
Vacuum cleaner hose or
brushes will not pick-up
POSSIBLE REASON
1 Power cord not firmly plugged
into outlet
2 No power in wall outlet
1 Dust cup filter is full
2 Unit clogged
3. Dust cup filter needs cleaning
1 Dust cup filter is full
2 Dust cup filter is not installed
correctly
3 Puncture/hole in dust cup filter
1. Hose is clogged
2. Dust cup filter is full
10
POSSIBLE SOLUTION
1 Plug unit in firmly
2 Check fuse or breaker. Replace
fuse/reset breaker. Take the ap-
pliance to an authorized service
centre
1 Empty dust cup filter
2 Turn unit off and unplug from wall
outlet. Remove dust cup filter and
check for object(s) in air duct or in
flexible hose and remove
3 Clean or replace dust cup filter
1 Empty or replace dust cup filter
2 Review dust cup filter instruc-
tions (see par. REPLACING AND
CLEANING THE FILTER)
3 Replace dust cup filter
1 Remove hose and/or brushes
2 Remove obstruction from hose
3.Empty and clean dust cup filter
Advertisement
Table of Contents
