Table of Contents
Advertisement
FITTING A DIFFERENT PLUG
This appliance is already fitted with a BS
1363 13 Amp. plug. The wires in the
mains lead are coloured as follows:
Blue : Neutral
Brown : Live
Should you need to replace
the plug, please read the
instructions and connect the
wires as detailed below.
If in any doubt, consult
a qualified electrician.
The coloured markings identifying the
terminals in your replacement plug may
not correspond with the colours of the
wires in the mains lead of this appliance,
so proceed as follows:
The wire that is coloured brown must be
connected to the terminal marked with the
letter L or coloured red.
The wire that is coloured blue must be
connected to the terminal marked with the
letter N or coloured black.
DISPOSAL OF YOUR OLD APPLIANCE
1. When the crossed-out bin symbol appears on a product it
means that the product is covered by European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via specific
collection facilities designated by the government or the local authorities.
3. Proper disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
For more detailed information about disposal of your old appliance, please
contact your local council, the waste disposal service or the shop where
you purchased the product.
Always fit the same value of fuse as that
originally supplied with your appliance.
Only use BS 1362 approved fuses.
As a guide only:
Appliances under 700 W can have a 3
Amp. fuse (red) and all others should
have a 13 Amp. fuse (brown).
When
disposing
(particularly the moulded type that has
been cut from the mains cord) always
remove the fuse as the plug could be
dangerous if ever inserted in a live socket.
11
of
an
old
plug
Advertisement
Table of Contents
