Maintenance - Monster 097H Speedy Plus Instruction Manual

Cyclonic vacuum cleaner
Table of Contents

Advertisement

Maintenance

NOTE: always unplug the appliance from mains socket before any maintenance
Clean the dust cup
1. Push the dust cup release button. Lift the handle of the dust cup and take it off from the vacuum
cleaner.
2. Empty the dust cup pressing the empty button.
3. Close the dust cup.
4. Put the dust cup onto the body case properly and press the handle to its original position.
Note: The Super H filter filter is protected by a net. It is possible to gently shaken the dust cup to let the
dust fall from the net. If the filter is covered by a thick layer of dust, hair, etc. the net may be pulled out
and the filter washed. It may be necessary to lightly brush the filter or rinse it.
Filter maintenance
Cyclone system for the greatest filtering of particles
The Super H filter are an effective system to remove from the inner environments almost all polluting
agents, dust-mites, pollen and mould spores.
To get the highest performance of the appliance it is very important to keep the filters clean. Regularly
clean the filter and change them when necessary.
1 Clean the air duct filter
To clean the air duct filter, remove the filter (back side of the cylinder). Rinse under running water and
let thoroughly dry before replacing it.
Air Duct filter
2 Clean the Super H filter
-
Pull out the dust cup
-
Empty the dust cup before removing the filter
-
Turn and open the upper part of the dust cup following the arrows and unscrew the filter
-
Wash the filter under running water and let it dry thoroughly before replacing it in the appliance. Do
not wash it in the dishwasher
Cleaning the motor brush
Important: always unplug the appliance before any cleaning or maintenance operation.
To eliminate hair or threads, cut with the scissors those wounded in the brush cylinder and then keep
them out of the cylinder.
Super H filter
9

Advertisement

Table of Contents
loading

Table of Contents