3Svision N6074 User Manual page 91

 Alarm Input Setting
Set the alarm input type between N.O.(Normal Open) and N.G. (Normal Ground).
The N.G. means N.C.
 Trigger Alarm output:
Click Trigger to start the alarm.
Click Clear to stop the alarm.
(Please make sure before you click Clear for close the alarm testing when the trigger
testing is done).
 Trigger mail
After you enter the email address and subject in the field, click the Set to test the mail
sending completely.
 Trigger FTP
Click the Set to upload AVI files to FTP server to test completely.
 HTTP Server
After you enter the message in the Message field, click the Set to upload the message
to HTTP server to test completely.
You can make custom parameters settings completely through
Application Setting > Event > Event Server.
 TCP Server
After you enter the message in the Message field, click the Set to upload the message
to TCP server to test completely.
 Trigger SAMBA
After you enter the Path in the field and click the Set to share the folder from your PC.
- 91 -
Bullet Network Camera