3Svision N6074 User Manual page 89

General:
Name: Name the trigger event.
Response to event trigger:
Always: Always monitoring
During time: Check the date you want to monitor (Sun.~Sat.) and the duration of monitoring.
For example, if you want to set the camera to monitor from 7 pm after work to 7 am
next morning from Monday to Friday, check the boxes from Monday to Friday, enter
"19:00" in the "Start From" field, and enter "12:00" in the "Duration" field.
Never: Do not set the time.
Trigger by: Sources of trigger events (Note: You can set only one trigger event once.)
Alarm input: The alarm is triggered by the security equipment connected from the DI terminals
behind the machine, such as door/window detectors, infrared sensors.
Motion Detection: The alarm is triggered when motion is detected. The camera will send an alarm
when any objects appear in the set detection area.
On boot: The alarm is triggered by reboot. The camera will send an alarm when the system
is rebooted due to power shortage, sabotage, or other reasons.
Blind Detection The alarm is triggered when blind area is detected. The camera will send an alarm
when any objects appear in the set detection area.
Net Loss The alarm is triggered when the network is disconnected. The camera response
process by the selection which you have set.
Response process: trigger event response (Note: Multiple selections are available)
Active alarm out: An event is detected by the security equipment connected from the DI terminal behind
the machine, such as high-decibel alarms, light projectors. You can set the alarm
duration in the "Duration" field.
Upload video/image The camera will save the Motion JPEG of the event to the Upload Server (FTP/SMTP)
to server: or the Recording Storage Device (Samba).
Include pre-trigger buffer: When an event is detected, the camera will record the
previous video image up to 10 seconds.
Include post-trigger buffer: When an event is detected, the camera will record the
post video image up to 10 seconds.
Continue video upload: When the event is continue, the camera will record the video
image up to 10 seconds.
For example: If the pre-trigger 5 seconds, post-trigger 5 seconds and continue video
upload 5 seconds have been selected, the total file size will be 15 seconds.
The camera will save the capture photo of the event to the Upload Server
(FTP/SMTP) or the Recording Storage Device (Samba).
Send HTTP The alarm will be sent to the HTTP server you specified. To use this function, set the
notification: coordinative HTTP server in the Event Server setting page in advance.
Send TCP The alarm will be sent to the TCP Server you specified. To use this function, set the
notification: coordinative TCP server in the Event Server setting page in advance.
Send NAP The alarm will be sent to the NAP Server you specified. To use this function, set the
notification: coordinative NAP server in the Event Server setting page in advance.
Day Night Force the camera turn into Day/Night Mode when the trigger is detected.
NOTE：
The setting pages of Add Event and Add Schedule are the same. There is only one difference between
them is the Add Schedule setting without the setting for Trigger by.
Delete: Delete the event cluster setting.
Modify: Modify the event cluster setting.
Time setting for the trigger event
- 89 -
Bullet Network Camera