Features N5071 can operate smoothly without the need to install additional software or hardware. All you need is a PC that is equipped with IE browser (6.0 or above) and connect the Internet Camera to the network to monitor the pre-set places remotely. It provides you with protection of your personal, home, and property security.
Speed Dome Network Camera H.264 / D1 Real-Time Package Contents After unpacking, check that if all the following items have been included: N5071 Speed Dome Network Camera Installation CD (Manual & Software) Installation Guide Gloves Assembly Kit ...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time System Requirements Before installing N5071 Speed Dome Network Camera, please make sure your system has the following recommended minimum hardware requirements. Internet Environment Ethernet 10/100M Ethernet Monitor System Requirements OS support Windows 2000, XP, Vista and 7 Browser support Internet Explorer 6.x or later...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time View of N5071 Speed Dome Network Camera Physical Description NOTE : There are 2 different types for installations. Wall Mount and Ceiling Mount. It depends on the type of model you are purchasing.
Speed Dome Network Camera H.264 / D1 Real-Time Getting Started Before getting to start N5071 Speed Dome Network Camera, please adjust N5071 in accordance with the following steps first. 1. Stabilize the Hardware Use the screwdriver to lock the bracket and Pedestal securely by three M6 screws after the I/O cables are put into the bracket.
Page 10
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 3. Assembling the dome camera body by plug-in the socket and pressing the lock gently downward to the pedestal with two hands on the side of the dome camera body. NOTE : Make sure the plug-in is fully locked by the socket.
Speed Dome Network Camera H.264 / D1 Real-Time Making Connections Before you connect your N5071, please make sure your PC has the LAN port available for connect to the network. Follow these instructions to connect the N5071 into your PC and LAN Port.
Use the audio in cable to connect the microphone with 3.5mm phone jack into the "MIC IN". Connect to the Switch HUB. Use a network cable and plug it into the LAN port of the N5071. Plug the other end of the cable in the LAN port of the HUB.
Fixed on the ceiling Fixed on the wall NOTE : 1. Please do not install N5071 Speed Doom Network Camera in locations of poor ventilation. This will result in poor operation. 2. N5071 Speed Doom Network Camera is weatherproof. - 13 -...
After the hardware has been installed, insert the installation CD into the CD-ROM driver and run the “Cam Finder.exe” following the steps below to search and change the IP address of N5071 Speed Dome Network Camera. NOTE: If the network environment has the router, please refer to Appendix: Set up the Router Setting with IP Camera for different environment description.
Page 15
(such as “PI IP”). You can change the settings for IP, Gateway Address and Network Mask to meet the requirements of your network environment. N5071 Speed Dome Network Camera uses HTTP Port1 and does not support Port2 settings.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Ready to Use Access to the IP Camera You can access the IP Camera through web browsers, follow the instructions to install the required plug-in on your computer. 1. Using Web Browsers Launch your web browser.
Page 17
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 2. Installation of Internet Explorer ActiveX Controller After the Username and Password are confirmed, a control setup screen pops up under the IE address bar. Click “Install ActiveX Control” to continue.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time View of Camera Main Page Once you have installed the software from the IE and you are ready to start the setup menu. The Camera utility enables you to change language, video settings. And you can also change the other setting by “Setting”.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Product Name Display the product name. The default name follows the product, and it not releases the permission of modification to customer. Product Name Mode Select the display mode between Live View and Setting.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Language It supports 7 kinds of different languages in web browser and the default setting is English. Click the pull-down menu to select the language for web browser from English, 简体中文...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Video Format It provides the triplex streaming, but it can use one streaming on the live view. The default setting is the MPEG.264 (Main). Click the pull-down menu to select the video format from H264(Main Stream), H264 (Sub Stream) and Motion JPEG.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time View Size It can fix well the resolution when enlarge or reduce the live view image. Click the pull-down menu to select the video format from 1/2X, 1X, 2X and 4X.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Streaming It provides 3 kinds of different streaming protocols. Click the pull-down menu to select the video format from UDP, TCP, and HTTP to apply or integrate on different requirement and environment.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 2. TCP Provide reliable data transmission, because the transmission will check the receiver first. Video streams are transmitted through RTSP 554 Port to avoid video fragment or mosaics, but this protocol will affect the FPS to reduce.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Brightness 100 Brightness 0 Brightness Adjust the brightness of image. Contrast Adjust the contrast of colors. Saturation Adjust the saturation of colors. Set to default Reset all of the color settings to default figures.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Alert The alert flash will be changed from green to red in order to warning users immediately when any event is triggered. This smart design can prevent the user omitting from any event.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Alert Message It will display the event message when receiving the event. And some controls and applications will be available. Please see the detail illustration as below: Alert Message Text Disable...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Disable Enable/Display the Alert Message The function of displaying message in field of Alert Message Text can be hidden when Alert is triggered. Alert Message Text field will keep previous values before Alert being triggered if there is a message already recorded.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Shortcuts Click the right-button of your mouse in Live View mode to display the Shortcuts List. Choose the option directly depend on different system requirements. The detail function illustration as below: +ZOOM IN Click the right button of your mouse and select +ZOOM IN to enlarge the image.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time -ZOOM OUT Click the right button of your mouse and select +ZOOM out to reduce the image. 8 Levels of zoom in/out are supported. NOTE: You can also Zoom In/Out the image by press the scroll wheel button of your mouse.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Full Screen Click the right button of your mouse and select Full Screen to change the screen to full screen mode and release it by click the button again. You can also release it by click the “ESC”...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Record Click the right button of your mouse and select Record to start to record the image and the file will saved at the default path. Stop the recording by click the button again.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Snapshot Click the right button of your mouse and select Snapshot to Snapshot the image and the file will save at the default path. You can also take snapshot by press on the shortcut bar.
Microphone Click the thumbnail of the Microphone on the shortcut bar to enable/disable it (one-way audio). Transmit the voice into the N5071 Speed Dome Network Camera by using the PC’s microphone. Buzzer Click the thumbnail of the Buzzer on the shortcut bar to enable/disable it (one-way audio).
N5071 Speed Dome Network Camera H.264 / D1 Real-Time It can receive the voice of the microphone from the N5071 Speed Dome Network Camera. Enable the Microphone and Buzzer at the same time to achieve the two-way audio application if you like it.
Page 36
3. Record Limit The Record Path Setting supported only and it has limit of file size. N5071 Speed Dome Network Camera will create the fixed recording file according to this setting. It provides two kinds of setting for record file size as below: Record File Size Record Duration.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Snapshot Snapshot the Live View image Click the thumbnail of the Snapshot on the shortcut bar to Snapshot the image in Live View and the file will save at the default path.
Page 38
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Snapshot Snapshot: C:\Snapshot\Snapshot__20091102-181620-804.jpg has been saved. Fail to snapshot in path C:\Snapshot NOTE: The setting of the path and filename will follow the Path Setting. - 38 -...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Setting User Preferences The Setting menu let you change the following settings: Basic Setting System Video/Image Audio User Network Date/Time IP Filtering Application Setting Event Motion Detection Object Missing/Tamper Detection Privacy Mask...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Basic Setting The Basic Setting menu lets you view the Basic Setting for N5071 Speed Dome Network Camera and change the following setting: System System System Log Video Image Video PreProc/Overlay...
IP, changes, and the date/time information. You can save the entries to a Word document by manual. Notice all of the information is deleted when you turn off the N5071 Speed Dome Network Camera.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Video/Image Video H264 Resolution: Set the resolution of the image from 704 x 576, 704 x 480 and 352 x 288, 352 x 240 Frame Rate (FPS): Set the frame rate from 1, 3, 5, 10, 15, 20 and 25.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time PreProc/Overlay PreProc Camera Position: Set the position of the camera from Default, Flip, Mirror and Rotate 180. Overlay Setting Language: Set the language for the overlay. Display mode: Set the display mode from Date, Time and Txt or not.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Sensor Use this setting to set the following setting or view the information of the camera after click the Setting: Language, System Information, Display Setup, Dome Settings, Camera, Motion, Restart, Factory Default and Help...
Page 45
N5071 Speed Dome Network Camera H.264 / D1 Real-Time - 45 -...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Audio Audio Set the Audio mode from Audio Off. Audio off: Turn the audio off; i.e. both of the microphone and speaker will be off. Audio in Codec: Select the type of Codec for audio encryption from G726/32, G711a, G711u and AMR.
H.264 / D1 Real-Time User N5071 Speed Dome Network Camera provides the administrator to set the privileges for administrator, operator and viewer that ensure the security and control of the camera. According to the requirements of the users, administrator owns the authority to define the privilege for each user.
Page 48
N5071 Speed Dome Network Camera H.264 / D1 Real-Time User List Use this menu to set the following setting: Add: Add a new user and to define a different privilege. Update: Change the privilege or password of a user. User name changed is not allowed.
Page 49
N5071 Speed Dome Network Camera H.264 / D1 Real-Time The root can not be deleted but can be updated. Activate the anonymous view and camera rotation functions; define the number of viewers who are allowed for on-line review simultaneously. Attention: The default user name and password have been set as “root”.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Network Network Setting IP Assignment DHCP DHCP (Dynamic Host Configuration Protocol) is a protocol that enables automatic assignment of TCP/IP information to the client. Each DHCP client connects to the DHCP server to access its network setting information, including IP address, gateway, and DNS server.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Services Setting Set the FTP Service Password here. Stream Setting Set the video streaming port here. (HTTP and factory default are recommended) Streaming HTTP: Port 80 can pass through most firewalls. Video streams are transmitted through HTTP Port (80 by default) to ensure passage through firewalls.
Page 52
N5071 Speed Dome Network Camera H.264 / D1 Real-Time NOTE: Please refer to the chapter of Stream for further detailed description. - 52 -...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time PPPoE Setting (Dial-up Networking Setting) Point-to-Point Protocol over Ethernet is a protocol that supports access to a high-speed wideband network using a PC and a wideband modem (such as xDSL, Cable, Wireless modem).
Page 54
N5071 Speed Dome Network Camera H.264 / D1 Real-Time PPPoE Dial: You can select whether or not to dial when you boot the Camera. (On boot or Off). Username: Enter the username provided by your ISP. Password: Enter the password.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time DDNS (Dynamic Domain Name Server) The IP address (Ex. 210.168.0.22) is like a telephone number, while the website address is like a name in an address book. The DDNS allows the user to access the website by entering the name of the website without memorizing a bunch of cold numbers.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time UPnP (Universal Plug and Play) If you connect your camera to a router, IP allocator, or wireless AP, your camera will possibly be blocked by the NAT and can’t be located on the Internet. To penetrate the firewall, activate the supportive item- UPnP.
Page 57
N5071 Speed Dome Network Camera H.264 / D1 Real-Time To Activate the UPnP function in Windows OS Windows XP 1. Windows component installation. Step 1 Select Control Panel. Step 2 Select Add/Remove Programs. Step 3 Select Add/Remove Windows Components. Step 4 Select Networking Services.
Page 58
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 2. Open Windows firewall option Step 1 Select Windows Firewall in the Control Panel. Step 2 Select Exceptions. Step 3 Select UPnP Framework. 3. View the connection device using “My Network Place”...
H.264 / D1 Real-Time SMTP (Mail Server Setting) N5071 Speed Dome Network Camera provides you to transmit images to a particular email address when a motion detection event occurred or a sensor is triggered. A mail server setting for the camera is required, if you want to use this function.
Speed Dome Network Camera H.264 / D1 Real-Time Samba N5071 Speed Dome Network Camera provides you to upload the snapshots to a specified shared folder when an event is triggered. A Samba setting is required, if you want to use this function.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Notification For a dynamic IP, you need to update the IP address every time when you connect to the camera via internet. This setting allows you to update the IP address by automatic notification of IP address change.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Multicast This function allows multiple people to watch video streaming without limited in the number of users, but is only applicable to the LAN environment. Video streaming format (H.264) is depended on the selected image format setting in Basic Setting →...
Click NTP in the Time Setting. Enter the IP address in the NTP server. (1~3) Press the SAVE to apply it. Once the NTP time obtain, the N5071 Speed Dome Network Camera will updated the time. NOTE:...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time IP Filter N5071 Speed Dome Network Camera provides you to allowed or deny the visitors from particular/target address by IP Filter Setting. General IP Filtering: Enable/disable Policy: Allow/deny Filter IP Address (Overview of the setting for IPs) Add: Enter the IP address that you allowed or denied it.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Application Setting The Application Setting menu lets you view the Application Setting for N5071 Speed Dome Network Camera and change the following setting: Event Event Trigger Event Server Motion Detection Blind Detection...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Event Event List Add Event: Click Add Event to enter the Trigger Even Setting. NOTE: It can provide up to 10 event settings. - 66 -...
Page 67
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Add Schedule: Click Add Schedule to add a new schedule. NOTE: It can provide up to 10 schedule settings. - 67 -...
Page 68
N5071 Speed Dome Network Camera H.264 / D1 Real-Time General: Name: Name the trigger event. Response to event trigger: Time setting for the trigger event Always: Always monitoring During time: Check the date you want to monitor (Sun.~Sat.) and the duration of monitoring.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Trigger Whenever the camera detected abnormal events during the scheduled time, it will respond by active trigger automatically. There are 2 types for the trigger response: Alarm messages sending and emailing.
Page 70
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Trigger mail After you enter the email address and subject in the field, click the Set to test the mail sending completely. Trigger FTP Click the Set to upload AVI files to FTP server to test completely.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Event Servers (Upload Server) You can make a setting to upload files to the server completely. Please make a setting for servers in the Event Server Setting by following setting: - 71 -...
Page 72
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Event Server List Add FTP Enter the information of the FTP server you specified. Name: The name of the FTP Network Address: IP address of the FTP Login: Log-in name...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Motion Detection Click the Area to open the setting frame and the setting frame will show on your screen. You can adjust the frame size by move and drag the edge of the frame on the arrow of your mouse, after adjusted click the left button of your mouse.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Blind Detection Blind Detection means that you can set the inside/outside area for detect. Blind Detection triggered if any object activity in the area that you have set. Click the Area to open the setting frame and the setting frame will show on your screen.
Speed Dome Network Camera H.264 / D1 Real-Time Privacy Mask To ensure the confidential, N5071 Speed Dome Network Camera provides the Privacy Mask for you to mask the image in the masked zone. The following diagram illustrates how to set the Privacy Mask.
Page 76
N5071 Speed Dome Network Camera H.264 / D1 Real-Time - 76 -...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Firmware upgrade Contact with your dealer for more information about firmware upgrade. Please follow the steps below to upgrade the firmware. Attention: Important! Read Carefully!! 1. Please close all of the application that you are using on your PC.
Page 78
H.264 / D1 Real-Time 5. The progressing status of the firmware upgrade will show on your screen. 6. N5071 Speed Dome Network Camera reboots automatically after the firmware has been upgrade completed. Reconnect to the server after 60 seconds. NOTE:...
Speed Dome Network Camera H.264 / D1 Real-Time Factory Default You can use this setting to reset N5071 Speed Dome Network Camera to the factory default value without any changes. Including the IP address all of you have set will be invalid.
Page 80
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Backup Back all parameters: Use this setting to backup all of the changes you have set. Click Backup and a file download inquired windows will pop up. Back up the file named param.bin.
Page 81
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Restore backup parameters: Use this setting to restore the changes that you have set. Click Browse to select a backup file and click Submit to confirm it. Select a backup file to restore.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Appendix Change the Internet Explorer Settings Change the security setting of IE browser to allow the ActiveX Control be plug-in to the IE browser. Please follow the steps as below: 1. Open the IE browser from Desktop or State Menu.
Set up the Router setting with IP Camera Use DHCP if you want to use N5071 Speed Dome Network Camera via the Internet (LAN). However, the IP must be set to fixed when you want to use the camera on a WAN. For this application, it is required to set up the function of the virtual server on the ADSL router.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time DDNS Application How to apply and setup the DDNS service? The DDNS (Dynamic DNS) is an application for network service. It can help you to solve the problem of dynamic IP change in network device. You can assign a name for favorable website to correspond with device IP address through DDNS.
Page 86
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 1. Please enter the website address of “DynDNS” (http://www.dyndns.com/) through Browser. 2. Please click Create Account. (Skip step 2~9 if you have an account with DynDns.org already.) 3. Please fill in all the required information in the table such as: Username, Password, Email and Security Image Number etc.
Page 87
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 4. A confirmation letter will send to your mailbox after you click Create Account. Please acknowledge the confirmation letter by clicking on the link provided in the mail to continue with the steps 5.
Page 88
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 6. Please click Dynamic DNS then select Dynamic DNS Free service. 7. Click Get Started button to add the new Hostname. 8. Set up the Hostname and IP Address by yourself. You can enter your favorite domain name as your Hostname, and input correct IP address (e.g.
Page 89
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 9. After add new hostname, click Next to enter the next step. (Note: as you are using Dynamic DNS Free service; so you can ignore the information of Shopping Cart. 10. Please click Activate Services button to enable DDNS service.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time How to check if the DDNS service is successful? 1. If you could not connect the IP devices through the domain name, which you have set up, you can test the DDNS service on your PC.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Mobile Application Our Speed Dome Network Camera can support the 3GPP(RTSP) connection through the mobile phone. Please check your ISP to provide the mobile networking service which working on your mobile phone first. And modify the setting of Video server to enable the application.
Page 92
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Click the “Setting” on right-upper to enter the setting mode. Step3: Check the RTSP streaming setting H.264 Type Click “Video/Image“ of Basic Setting “Video“ Set up the sub streaming resolution (e.g. Please see the suggestion parameter as below picture) Click Save to finish the setting.
Page 93
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Step4: View limit Setting According to the requirement, you can pass the live view limit. Please see the illustration as below. Without Password With Password With password Don’t need to enable the “anonymous login” function, but you need to input the account information every login.
Page 94
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Step5: Try to connect Video server through the mobile phone Check the mobile phone can support the streaming media player and internet service, and then see the example operation as below: NOTE:...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Symbain System Example: Nokia N71. Follow these steps to set up the viewing function 1. Enter multimedia data from the main screen. 2. Select a streaming link 3. Add a new link.
Page 96
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 4. Enter the link name. 5. Enter the IP address of the camera e.g. (Without Password) rtsp://xxx.xxx.xxx.xxx:554/cam1/3gpp e.g. (With Password) rtsp://xxx.xxx.xxx.xxx:554/cam1/3gpp?user=root&pwd=root 6. Select OK to save the setting. NOTE: Some mobile phone can only support the without password application 7.
Page 97
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 8. Select “Yes” to connect. 9. Connecting. 10. Loading the image 11. Show the video stream on the mobile screen. NOTE: If the software cannot receive the stream from the video server, please try to check the Internet setting of software is correctly.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time iPhone System Example: iPhone 3GS. Follow these steps to set up the viewing function 1. Download and install the free video streaming software through iPhone(App Store) or iTune. (e.g. iPhone(App Store)) 2.
Page 99
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 4. Tap “Streamer” to enter the download page 5. Tap FREE button to change the selection. 6. Tap INSTALL to install the software. - 99 -...
Page 100
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 7. Go back the main screen then select Steamer icon to open the software 8. Tap “Bookmarks” icon. 9. Tap “+” signal to add the bookmark. - 100 -...
Page 101
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 10. Input your URI link of the video server (e.g. rtsp://xxx.xxx.xxx.xxx/cam1/mpeg), and tap Save button to save the link. NOTE: The software can only support the Without Password mode. The video server need to set more then QVGA(320 x 240) resolution.
Page 102
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 12. Show the video stream on the mobile screen 13. Tap the screen to display the detail information, and the APP can support the audio application. NOTE: If the software cannot receive the stream from the video server, please try to check the setting is correctly.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Support the Cellular / Mobile Phone List Please suggest the list to buy the applicable cellular / Mobile Phone which to use. Brand Type Brand Type Nokia 6630 Vibo Win II...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Multicast Application The Multicast function is a technique for one-to-many communication over an IP infrastructure in a network. The PC can be given the network package after login the account, so the function can use one network package to copy many packages to PCs. It allows multiple people to watch video streaming without limitation on the number of users, but is only applicable in the LAN environment.
Page 105
N5071 Speed Dome Network Camera H.264 / D1 Real-Time N.O. Item Illustration H264 (Main) Display the multicast setting of H264 (Main) H264 (Sub) Display the multicast setting of H264 (Sub) Motion JPEG Display the multicast setting of Motion JPEG The function will display the different streaming mode from IP device. No matter how many modes to display, the content is the same setting to the user.
Page 106
N5071 Speed Dome Network Camera H.264 / D1 Real-Time NOTE: The function can only enable one streaming to use the application. - 106 -...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time H264 (Main) The function has some limit parameter, so please follow our limit parameter to set up it. All restrictions exist in the rear of each option. NOTE: Suggest using the default parameter to use the multicast function.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time H264 (Sub) The setting is the same with the H264 (Sub). NOTE: Suggest using the default parameter to use the multicast function. Please make reference to the chapter of Basic Setting > Network > Multicast for further detailed description.
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Motion JPEG The setting is the same with the MJPEG. NOTE: Suggest using the default parameter to use the multicast function. Please make reference to the chapter of Basic Setting > Network > Multicast for further detailed description.
Page 110
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Please see the detailed steps to Set up the Multicast function as below: 1. First, check the LAN environment has the device of IGMP service. IGMP 2. Enter the device then enable the service.
Page 111
N5071 Speed Dome Network Camera H.264 / D1 Real-Time 6. Click On button from Enable Selection to enable the Multicast function. 7. Go back the Live View Mode then click the of Stream to select the Multicast pull-down menu 8. Wait a 5~10 sec to re-display the live image via Multicast NOTE:...
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Troubleshooting and FAQs Question Answer and Solution Function The camera uses MJPEG or H264 compression technology to provide quality images. MJPEG is a standard image compression technology What encoder and decoder...
Page 113
N5071 Speed Dome Network Camera H.264 / D1 Real-Time • When the camera still can’t be located over 1 minute, re-activate the camera. • Do not connect the camera to more than one router. The IP Finder will not be able to detect the camera.
Page 114
N5071 Speed Dome Network Camera H.264 / D1 Real-Time • When using PC to connect to the camera for the first time, a security warning window will tell you that you need to download the ActiveX control. When you are using Windows 2000 or Windows XP, you might...
Page 115
N5071 Speed Dome Network Camera H.264 / D1 Real-Time Delay might occur when you are accessing a video stream and remotely I can't control the camera to moving the camera horizontally. Where significant delay is identified when move up, down, right, or left you move the camera horizontally or vertically deactivate the audio smoothly.