Superior 40 Signature series Care And Operation Instructions Manual page 15

INNOVATIVE HEARTH PRODUCTS • POWER VENT DV GAS FIREPLACES (DRT63__TYN / DRC63__TYN) • CARE AND OPERATION INSTRUCTIONS
Traditional Only: Log Placement
3
6
7
Log Number
1
2
3
4
5
6
7
Table 6 - Log Set
Align Two Holes At Bottom Of Log (1)
Over The Pins On The Gas Burner.
Figure 13 - Placing Log 1
2
Align Groove At The Bottom Of Log (2) Over
The Grate And Push It Towards The Rear.
Figure 14 - Placing Log 2
5
2
4
1
Description
Log, Center
Log, Rear
Log, Center/Left
Log, Center/Right
Log, Rear/Top
Log, Front/Left
Log, Front/Center
1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
3
Engage Logs (3 & 4) With The Grate Pins And Align Groves At
The Bottom Of The Logs Over The Grate.
Figure 15 - Placing Logs 3 and 4
Align Hole At Bottom Of Log (5)
6 5
Over The Pin On Log (2).
Engage Log (6) With The Grate Pin
And Align Groove At The Bottom Of
The Log Over The Grate.
Figure 16 - Placing Logs 5, 6, and 7
Contemporary Only: Glass Media Placement
1. Spread a thin layer of the media evenly on the burner and
media screen.
Figure 17 - Glass media installed
2. On the corner of the right media screen, arrange the media to allow
the pilot flame to reach the burner during lighting.
4
7 2
Engage Log (7) With
4
The Pin On Log (4).
15