Table of Contents
Advertisement
11
Inspection
11 Inspection
Offer your customer an annual inspection and maintenance
contract. The activities to be included in an annual inspec-
tion and maintenance contract can be found in the inspec-
tion and service reports (see pages 86 and 87).
CAUTION
Insufficient or improper cleaning and mainte-
nance can cause damage to the installation.
Inspect and clean the heating system once a
year.
Carry out maintenance as required. Immedi-
ately remedy faults. This will avoid further
damage to the system!
WARNING
Do not use this boiler if any part has been under
water. Immediately call a qualified service tech-
nician to inspect the boiler and to replace any
part of the control system and any gas control
which has been under water.
CAUTION
Risk of electric shock.
Before opening the system:
disconnect the heating system from the
power supply using the heating system
emergency OFF button or disconnect the
relevant circuit breaker of the house from the
power grid.
Secure the heating system against acci-
dental restarting.
Periodically examine the venting systems and cleaning
of the screens in the vent terminal.
Also periodically inspect the low water cutoffs, including
flushing of float types and clean the condensate collec-
tions and disposal system.
11.1 Prepare the heating system for
inspection
Switch OFF the heating system by pressing the main
switch of the BC10.
INSTRUCTION FOR THE INSTALLER
If gas pipes have to be disconnected from
the gas burner fitting, the burner cover must
only be opened by a specialized profes-
sional.
Close the gas valve (fig. 75, pos. 1).
Close the isolating valves (fig. 75, pos. 2).
62
Logamax plus GB162-80 kW/100 kW - Subject to modifications resulting from technical improvements!
Fig. 75 Closing the valves (here: in closed position)
1
2
Hide quick links:
Advertisement
Table of Contents
