Important Safety Information; Practice Safe Maintenance - Land Pride 357-344M Operator's Manual

Important Safety Information

These are common practices that may or may not be applicable to the products described in
this manual.

Practice Safe Maintenance

Understand safe and correct maintenance
procedures before doing work. Use proper
tools and equipment, refer to Operator's
Manual for additional information.
Work in a clean dry area.
Never run mower in an enclosed area. Mower
engine exhaust emits carbon monoxide and
other poisonous gases.
Keep hands, feet, body extremities, and
clothing away from all moving parts such as
pulleys, belts, cutting blades, engine, and
wheels. Don't wear loose fitting clothing while
operating or servicing mower.
Put mower in neutral, set park brake,
disengage blades, turn off engine, remove
switch key and wait for all moving components
to stop before performing maintenance on the
mower.
7/01/14
Table of Contents
Repairs or maintenance requiring engine
power should be performed by trained
personnel only.
Allow mower to cool completely before
performing maintenance.
Disconnect battery ground cable (-) before
servicing or adjusting electrical systems or
welding on the mower.
Observe safe fuel handling precautions. Fuel is
flammable and vapors are very explosive.
Do not grease or oil mower while in operation.
Inspect all parts. Make sure parts are in good
condition and installed properly.
Remove buildup of grease, oil, or debris.
Replace all guards and floor pan before putting
mower back into service.
Remove all tools and unused parts from
mower before operation.
ZSR54, & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-344M 3