Table of Contents
Advertisement
88
SERIAL COMMUNICATION FUNCTION
12. Black Level (Command: nm)
► Adjusts the black level.
Disabled when the Black mode is selected.
Transmission [n][m][][Set ID][][Data][Cr]
00: Low
Data
(* Transmitted in hexadecimal code)
Ack [m][][Set ID][][OK][Data][x]
00: Low
Data
13. Energy Saving (Command: np)
► Sets the energy saving mode.
Transmission [n][p][][Set ID][][Data][Cr]
Data
00: Minimum
02: Maximum
(* Transmitted in hexadecimal code)
Ack [p][] [Set ID][][OK][Data][x]
Data
00: Minimum
02: Maximum
14. Auto Config
(Command: ju)
.
►
Optimizes the screen automatically in PC
input mode.
Transmission [j][u][][Set ID][][Data][Cr]
01: To set
Data
(* Transmitted in hexadecimal code)
Ack [u][] [Set ID][][OK][Data][x]
01: To set
Data
01: High
01: High
01: Medium
01: Medium
15. Input Select (Command: xb)
► Select the input signal of the set.
Transmission [x][b][][Set ID][][Data][Cr]
Data
20: AV
60: RGB 1
90: HDMI
(* Transmitted in hexadecimal code)
Ack [b][] [Set ID][][OK][Data][x]
Data
20: AV
60: RGB 1
90: HDMI
16. Key (Command: mc)
► Sends a key code of the IR remote control.
Transmission [m][c][][Set ID][][Data][Cr]
Data Key Code: see page 90 .
(* Transmitted in hexadecimal code)
Ack [c][] [Set ID][][OK][Data][x]
40: Component
61: RGB 2
40: Component
61: RGB 2
A0: HDMI-PC
Advertisement
Table of Contents
