Smartshare; Smartshare Before Using; Before Using; Connecting A Usb Storage Device - LG SA560 Owner's Manual

SMARTSHARE

Before Using

Connecting a USB Storage
Device
Connect a USB storage device (external
HDD or USB flash drive) to the USB
port of the projector to view multimedia
content.
You cannot write to or delete data from the
USB storage device.
Connect a USB flash drive as shown
below.
USB flash drive
To disconnect the USB
storage device
1
Press the Q.MENU button.
2
Use the or
to USB Device and press the OK
button.
3
Remove the USB device.
NOTE
y After the USB storage device is
disconnected, it cannot be read.
Remove the USB storage device
and connect it again.
button to move
Tips for Using a USB Device
A USB storage device installed using
y
an automatic recognition program
or its own driver might not be
recognizable.
Some USB devices may not be
y
supported or will not work properly.
Please use only a USB storage
y
device formatted as a FAT32 or NTFS
file system provided by Windows.
It is recommended to use an external
y
USB hard disk with rated voltage of 5 V
or less and rated current of 500 mA or
less.
It is recommended to use a USB hub
y
or hard disk drive with its own power
supply. (If the power supplied is not
enough, the USB storage device may
not be detected properly.)
It is recommended to use a USB flash
y
drive which is 32 GB or less and a
USB hard drive which is 2 TB or less.
If a USB external hard drive with the
y
power saving function does not work,
turn the hard drive off and on again
to make it work properly. See the
owner's manual of the USB hard drive
for more information.
The data of a USB device may be
y
damaged, so it is recommended to
backup any important files. Users are
responsible for data management.
The manufacturer bears no
responsibility.
35
SMARTSHARE