Hosen lighting Technology Limited 5.2. Fixture Linking To run your light shows of one or more fixtures using DMX‐512 controller or to run synchronized shows on two or more fixtures in master/slave operating mode , you need DMX cables to link the units from DMX IN to DMX OUT. Notice: the length of signal cables should be within 100meters, to prevent the signal ...
Hosen lighting Technology Limited ★ Install or dismantle should operate by professional engineer ★ Using lamp,the change rate of power voltage should be within±10%,If the voltage is too high,it will shorten the light’s life; if it’s not enough, will affect the effect. 8. Disclaimer ...
Need help?
Do you have a question about the HS-MB200 and is the answer not in the manual?
Questions and answers