Table of Contents
Advertisement
3.1.
E1 interface:
Input impedance:
Interface bit rate:
Line code:
Physical characteristics:
Frame structure:
Pass-through characteristics:
Jitter tolerance:
Functions:
3.2.
V.35 interface:
Physical characteristics:
Connector type:
Working mode:
Interface bit rate:
3.3.
Cable type:
When connecting to the BNC interface, it is suggested to use SYV 75-2-2 coaxial cable.
SYV 75-2-1 or SYV 75-1-1 could also be chosen.
When connecting to RJ-45 interface, it is suggested to use 0.6mm (22AWG) twisted pair.
When connecting to DTE equipment such as Router through M34 interface, it is
suggested to use special DTE cable for Router. When the DTE cable is not long enough,
Dynamix can provide CBL-V35-M34F/M34M- D extension cable.
When connecting to other DTE equipment through M34 interface, it is suggested to use
cross-connect cable CBL-V35-M34M/M34M-X-D provided by Dynamix.
3.4. Power consumption:
AC: 220V/50Hz (input ranges from 165 to 265V)
DC: -48V (input ranges from -36 to -72V)
+24V (input ranges from +18 to +36V)
Power consumption: ≤ 5W
3. Parameters
Two 75Ω (unbalanced BNC interface) and one 120Ω
(balanced RJ-45 interface)
2048Kbps±50ppm
HDB3
Complies with ITU-T G.703
Complies with ITU-T G.704
Complies with ITU-T G.823
Complies with ITU-T G.823
Completed link alarm indication, Fault Pass Through
(FPT) and auto-reset
Complies with ITU V.35 interface standard
ISO2593 female connector (M34 female)
DCE (support cross-connection with other DCE device)
V.35 interface bit rate is N×64Kbps ( N=1~31 ) at E1
fractional pattern;
V.35 interface bit rate is 2048Kbps at E1 transparent
pattern
5
Advertisement
Table of Contents
