Table of Contents
Advertisement
4.5. Basic Connection
The topological figures here are just for reference, users can design it according to
practical application. The figures only take RC903-V35FE1 standalone converter as
an example.
1)
Point-to-point fractional E1 mode in "Master clock — Slave clock"
structure
(Master clock)
As the above figure shows, when connecting Routers or other equipment with V.35
interface using point-to-point pattern, Routers are required to work at DTE mode. For the
convenience of installation and preparation, users can set Master Clock Mode in local
converter and Slave Clock Mode in remote converter, and the clock source should be in
local converter.
(Slave clock)
17
Advertisement
Table of Contents
