Drivers & Users; Logging In; Changing Current Drivers; Changing Active Users - peoplenet TABLET & BLU.2 Quick Reference Manual

DRIVERS & USERS
The Current Driver is the user that is associated with the
engine data collected, including miles driven.
For vehicles using eDriver Logs, determination of the Current
Driver is based on the following:
1. The driver in Driving duty status.
2. If no drivers are in Driving status, the Current Driver is the
user that was last in the Driving status.
3. If neither of the above statements is true, the first user to
login into the device is the Current Driver.
NOTE:
Change Current Driver will appear only if there are two
drivers logged in and you are a non-eDriver logs user.
The Active User differentiates which user is currently interact-
ing with the device. For vehicles using eDriver Logs, the Active
User's information will be shown when viewing eDriver Logs
data, graphs, and summary information.

LOGGING IN

TABLET starts up automatically with the truck's ignition switch
and displays the Login screen.
1. If no drivers are currently logged in, the Login screen will appear.
2. If another driver is already logged in, select the LOGIN
shortcut from the Driver menu to display the Login screen.
3. Enter DRIVER ID AND PASSWORD.
4. Press the OK button to initiate a data call to receive
driver information.
NOTE:
If a second user needs to log in at the same time,
press the DRIVER2 button to redisplay the Login
screen. Repeat steps 3 and 4.
14
DRIVERS & USERS

CHANGING CURRENT DRIVERS

NOTE:
Change Current Driver will appear only if there are two
drivers logged in and you are a non-eDriver logs user.
1. Select the CHANGE DRIVER shortcut in the Driver menu
to display the Switch Current Driver screen.
2. Press the SWITCH soft button to make the other logged-in
user the current driver.
NOTE: The Switch Current Driver screen remains visible
until you press the BACK or HOME buttons.

CHANGING ACTIVE USERS

1. Select the CHANGE USER shortcut in the Driver menu
to display the Switch Active User screen.
2. Press the SWITCH soft button to make the other logged-in
user the active user.
NOTE:
The Switch Active User screen remains visible until
you press the BACK or HOME buttons.
15