Haier ESD 300 Series Service Manual page 72

Confirm all tests in Service Bulletins on the Haier parts
and service web site. Additional models available
Dishwasher door closed -- rapid advance by selecting the next button in sequence
1 press High Temp Wash
2 press Heated Dry
3 press High Temp Wash
LED will display 88 then
4 press Pots and Pans – water inlet valve will run for 90 seconds
5 press Normal Wash – wash motor will run for 2 minutes and then stop for
1 minute then repeat.
6 press China Crystal – the detergent dispenser will work for 1 minute then stop for
1 minute then repeat.
7 press Light Wash - The heater and washing pump will run for 1 minute then stop
then repeat.
8 press Rinse & Hold – the heater is on for 5 minutes then off for 5 minutes then
repeats
9 press Sanitize Rinse – the dry vent and drain pump operates for 2 minutes
then stops for 9 seconds then repeats
10 press High Temp Wash – the vent door wax motor operates for 1 minute and stops
for 1 minute then repeats
11 press Cancel / Drain – will end the test program and start a 2 minute pump-out.
Remaining time will be displayed on the LED display
DIAGNOSTICS
Rapid Test Program
ESD 310-311-312