Inserting And Removing Card - Hitachi DZ-BD7H Quick Operation

Select "YES" by pressing d, then press the confirmation button.
Fomat Disc
Disc is not formatted.
Format the Disc now?
YES
ENTER RETURN
(When using a DVD-RW)
The recording format selection screen appears.
Select "VR Mode" or "VF Mode" by pressing d/c, then press the
confirmation button.
Fomat Disc
Disc Format
Select record format.
VR Mode
ENTER RETURN

Inserting and Removing Card

The terminals should face away from
the LCD monitor.
• When using a BD-RE/BD-R, formatting
will start. Skip step
• When using a DVD-RW, proceed to step
NO
VR Mode
After recording, you can perform various
editing functions such as choosing and
deleting scenes. You can play back the
VF Mode
disc in a device which supports 8cm
DVD-RW (VR Mode) after finalizing the
disc.
VF (Video) Mode
Although editing cannot be done on the
camcorder, you can play back the disc on
other DVD devices after finalizing the disc.
Pay attention to
the orientation of
the card.
.
Always turn off the power before
inserting a card.
Open the cover.
Push the card in until it clicks into
place.
(To remove the card, push it in
slightly and release. The card will
pop up and you can remove it).
Always close the cover.
.