Setting Up The Battery Pack; Removing The Battery Pack - Hitachi DZ-BD7H Quick Operation

Quick Operation (English)

Setting up the battery pack

Charging status
During charge
Charge complete
CHARGE
indicator
If the CHARGE indicator does not
light, check that the connections
( , , and
connected.
After charging is complete, attach the battery pack to the camcorder.

Removing the battery pack

CHARGE indicator
Lit
Unlit
) are firmly
Always turn the power off before
disconnecting the power supply.
While pressing and holding the BATT
switch, slide the battery pack upward,
then remove it.
• Be careful not to drop the battery pack
Note
Charging will not occur if the DC
power cord is connected.
while detaching it.
Terminal at bottom