Haier HB21FC45N Series Service Manual page 11

SERVICE MANUAL
Model: HB21FC45N*
3-1-2.Freezer door handle
1. Retrieve the handle clearly marked for the Freezer Door that needs attachment.
2. Insert the Handle Connecting Screws into the holes provided on the Freezer Door. Using a hand
held screwdriver tighten the Handle Connecting Screw until the screw threads disappear and the
first flat surface of the Handle Connecting Screw touches the Freezer Drawer surface (as shown in
illustration1- step2). Do not over tighten-damage to the door can occur.
3. Place the Freezer Drawer Handle onto the Handle Connecting Screws (as shown in illustration1
–step3).The Freezer Drawer Handle should rest comfortably on these Connecting Screws.
4. Insert the Connecting Bolt into the holes on the bottom of the Freezer Drawer Handle marked
"Left". Using the provided Hex Driver and tighten until the handle is fixed firmly to the door. Repeat
this process for the "Right" side of the Freezer Drawer Handle (as shown in illustration 2-step4).Be
careful when tightening not to scratch the door surface.
5. To disassemble the Refrigeration Door Handle, follow these directions in reverse.
Issue 2010-07-05
Rev. Ref1007S019V0
11