Panasonic KX-FT21BX Service Manual page 154

KX-FT21LA
2. Scanning
When the document is set, in the
paper tray does the Document Sensor
(PS1) turn ON ?
The motor rotates CW and the
document is pre-fed.
Press the dial key.
Press the start key.
Does the motor rotate CW and is the
Read Position Sensor (PS2) ON?
The motor rotates CW and the document data
is scanned by the Image Sensor until the
Read Position Sensor (PS2) turns OFF.
The motor rotates cow and the
document is ejected.
END
3. Printing
Is the recording paper installed in the
paper cassette properly ?
Is the data received ?
The motor rotates CCW and the
CAM is set to the Receive mode (B).
The motor rotates CW and the received
document is printed.
The motor rotates CCW and the recording
paper is ejected.
The motor rotates CW and the CAM is set to
the Transmit mode (A).
END
Note : See 4-6. SENSORS AND SWITCHES.
NO
YES
NO
YES
NO
YES
YES
See 3-11. Sensor Section (page 77.)
Error is displayed.
Set the recording paper properly.
- 128 -