ZyXEL Communications NWA1100N-CE CloudEnabled Quick Start Manual page 7

Step 5: Once you have logged in, configure the Access Point's IP address and
DNS information to match your existing network configuration.
Step 6: Disconnect the Access Point from your computer and connect it to
the Local Area Network. The access point will automatically receive its
configuration from CloudCommand as it connects to the Internet.
The NWA1100N-CE is PoE (Power over Ethernet) compliant. It can be
powered either with the included adapter or a Power over Ethernet (PoE)
switch. Once powered, the "SYS" LED will turn solid green to indicate the unit
is functioning properly.
Page 7