ZyXEL Communications NWA1100N-CE CloudEnabled Quick Start Manual page 5

Step 3: Choose the appropriate registration option:
New Customer: If you don't have an existing CloudCommand™ account, you
may use our simple step-by-step wizard to create one. The wizard will guide
you to complete the setup of your entire wireless network.
Existing Customer: If you already have a CloudCommand™ account, use your
username and password to log in.
1.3.1. Deploying the Access Point with Dynamic IP
Addressing (DHCP)
If your network automatically assigns IP addresses (DHCP service), simply
connect the Access Point to your network. Plug the included Ethernet cable
into the LAN port on the back of the access point. Plug the other end into
your existing router or switch.
There is no further setup necessary, as long as the access point can reach the
Internet. The access point will automatically set itself up and connect to the
internet. You can reconfigure your Access Point to a static IP using the
CloudCommand™ interface in the future.
The NWA1100N-CE is PoE (Power over Ethernet) compliant. It can be
powered either with the included adapter or a Power over Ethernet (PoE)
switch. Once powered, the "SYS" LED will turn solid green to indicate the unit
is functioning properly.
Page 5