Korg i2 HD Installation Manual page 4

7. Powering on, Initializing
For the i2/i3 to function correctly, it has to be initialized first. Hold down the "EDIT STYLE" and
"DISK" keys and switch on the i2/i3. Please switch the instrument off again after the initialization
procedure.
8. Formatting the HARD DISK and Testing
Hold down the "EDIT STYLE" and "EDIT PROGRAM" keys and switch the instrument on again.
• If the message "HARDDISK: ERROR" occurs, please switch the instrument off again and recheck
the installation. This message means, that the hard disk does not work because it has not been
detected by the operating system.
• If the partition to be formatted contains data, the message "DISK: CONTAINS XY FILES" will
appear on the display. Check the data of this hard disk partition and decide whether you want to
use it or not.
• Finally press the "DISK" key and use the "PAGE+" key to select the "DISK 5: UTILITY" page. Use
the cursor position keys to select "FORMAT DISK" and use the dial or the "UP/DOWN" keys to
select the desired partition (C,D,E,F,G,....). Then press cursor position key "G/H" to format the
desired partition and use cursor position keys "E" or "F" to confirm your decision.
After installing the hard disk you must use the above procedure to format each of the
remaining partitions C,D,E,F,G.... separately. Otherwise you will not be able to save data to the
corresponding partitions !