Changing The Oil - Honda ECM2800 Owner's Manual

Generating set
Hide thumbs Also See for ECM2800:
Table of Contents

Advertisement

MAINTENANCE

CHANGING THE OIL

CAUTION :
• Prolonged and frequent contact with used engine oil can cause skin cancer. Although this
is unlikely, it is sensible to wash your hands thoroughly after handling used engine oil.
Drain the oil while the engine is still warm so that the oil flows out quickly and completely.
1. For ECMT7000 only: undo the 6 screws maintaining
the left side plate and remove the plate.
2. Remove the oil filler cap [1] and the drain plug [2].
3. Put the drain plug [2] back on, complete with its ring
seal [3] and tighten fully.
4. Fill up with the recommended oil
check that the level is flush with the oil filler tube.
Oil capacity: ECM2800: 0.6
ECMT7000: 1.1
[2]
[3]
Protection of the environment
Waste oil is a serious source of pollution of our environment; we strongly recommend that
you take it in a leak-proof container to a service station or a waste disposal site, which will
recycle it. Do not throw oil away with household waste, and do not dispose of it by pouring it
away on the ground or down the drain.
18
(see page
10) and
l
l
[1]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecmt7000

Table of Contents