Hard Drive Installation - Origen ae S16T User Manual

Hard Drive installation

The S16T supports 4 hard drives
as standard ; three in the primary *
HD cage and one above the ODD.
Each HD requires four anti-vibration
mount screws, secured as shown,
which will isolate the drive from the
chassis once installed
bracket is only needed for the drive
above the ODD and should be fitted
on the one side prior to installation.
To install drives 1,2 and 3, begin by removing the two thumb screws...
To install the 4th drive above the optical drive...
*A fifth drive can be installed to the S16T using the HM100 hard drive mount (optional).
6
. The mount
mount
screw
mount
bracket