DFI-ITOX NP100-N16C User Manual page 63

Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives. Move the cursor
to this field then press <Enter>. Use the Up or Down arrow keys to select a de-
vice then press <+> to move it up or <-> to move it down the list.
1. Bootable Add-in Cards
: Move PU/PD/+/-: Change Priority
↑↓
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
Virus Warning
This field protects the boot sector and partition table of your hard disk drive.
When this field is enabled, the Award BIOS will monitor the boot sector and par-
tition table of the hard disk drive. If an attempt is made to write to the boot sec-
tor or partition table of the hard disk drive, the BIOS will halt the system and an
error message will appear.
After seeing the error message, if necessary, you will be able to run an anti-virus
program to locate and remove the problem before any damage is done. Many
disk diagnostic programs which attempt to access the boot sector table will cause
the warning message to appear. If you are running such a program, we recom-
mend that you first disable this field.
CPU L1 and L2 Cache
This field is used to speed up the memory access. Enable the external cache for
better performance.
Hyper-Threading Technology
This field is used to enable the functionality of an Intel
Hyper-Threading Technology and will appear only when using this processor.
Phoenix - AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
F6: Fail-Safe Defaults
Item Help
Menu Level

Use < > or < > to select
↑ ↓
a device, then press <+>
to move it up, or <-> to
move it down the list.
Press <ESC> to exit this
menu.
F10: Save ESC: Exit
F7: Optimized Defaults
processor that supports
®
3
BIOS Setup
63