52
Using a DVD-ROM drive
Sample drive tray fully extended
5
Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in "If Something
Goes Wrong" chapter of the electronic user's guide.
6
Place the disc carefully in the disc tray, label side up.
7
Gently press the disc onto the center spindle until you
feel it click into place.
8
Make sure the disc is completely on the spindle and is
lying flat on the tray.
9
Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing discs (CD or DVD)
To remove a disc with the computer turned on:
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Never touch the surface of the disc.
Never stack discs. If you incorrectly handle the discs, you
could lose data.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact your network administrator for assistance.