Customizing The Channel Settings - Jensen JE3214 User Manual

Customizing the CHANNEL Settings

Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LED TV on.
2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT
buttons to select the CHANNEL.
3. Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT
buttons to change the setting, and press the MENU or EXIT button to exit.
The CHANNEL menu includes the following options :
Air/Cable
Auto Scan
27
Application
12
6
Setup
Picture Time Lock
Audio
Air
Air/Cable
Auto Scan
Favorite
Show Hide
50 3
Channel No
KOCE LB
Channel Label
DTV Signal
Select Move
MENU
Allows you to select between Air and Cable.
Use Down button to highlight "Auto Scan", then press RIGHT or
ENTER button to enter into the following menu.
Picture Audio
Cable System
Start to Scan
Move
If you select "Air" as input signal in Antenna , you can press RIGHT or
ENTER button to search the channels automatically.
Picture Audio
Move Move
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
Channel
Good
Exit
12
6
Setup
Time Lock Channel
Auto
Select Return
MENU
12
6
Setup
Time Lock Channel
RF CH 7
Found 4
NEXT Return
MENU