Customizing The Picture Settings - Jensen JE3214 User Manual

Customizing the PICTURE Settings

Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LED TV on
2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT
buttons to select the PICTURE.
3. Use the UP and DOWN buttons to highlight an individual PICTURE options, use the LEFT and RIGHT
buttons to change the setting, and press the MENU or EXIT button to exit.
The PICTURE menu includes the following options :
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
HDMI CEC
19
Application
12
6
Picture Audio Time
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
HDMI CEC
Select Move
Cycles through picture display modes: Standard, Dynamic, Soft, Personal.
Controls the difference between the brightest and darkest regions of the picture.
Controls the overall brightness of the picture
Controls the color.
Controls the tint.
Increase this setting to see crisp edges in the picture; decrease it for soft edges .
Cycles through color modes: Normal, Cool, Warm.
12
6
Setup
Picture Audio Time Lock Channel
On
CEC Mode
Device Auto Standby
On
TV Auto Power
On
TV Auto Switch On
Move Select Return
MENU
If you turn off the CEC Mode then the following items (TV Auto Power, TV Auto
Switch, Device Auto Standby) will not be used.
On - TV will turn on when compatible CEC device is activated
TV Auto Power
on HDMI connection.
TV Auto Switch On - TV will switch to HDMI inputs when compatible CEC device
is activated on HDMI connection.
Device Auto Standby On - When the TV is turned off, any connected, compatible
CEC device will also turn off.
Setup
Lock Channel
Standard
50
50
50
0
50
Normal
Exit
MENU