JVC LT-19A1 Instructions

WIDE LCD PANEL TV INSTRUCTIONS
LT-19A1
© 2010 Victor Company of Japan, Limited
Safety Precautions
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
• Follow this manual regarding setup! • Hold the TV so as not to scratch the screen!
- Connect only to a 110-240 V, 50/60Hz AC outlet. - Do not touch the screen when carrying the TV.
• Make enough room for inserting and removing the power • Never dismantle the rear panel!
- It may cause an electric shock.
plug!
• Place the TV as close to the outlet as possible! • Never obstruct the ventilation holes!
- It may cause overheating or a fire.
- The main power supply for this TV is controlled by inserting or removing
the power plug. • Handle LCD panel with care!
• Never cut or damage the power cord! - Use a soft, dry cloth when cleaning.
- If the AC plug is not the right shape, or the power cord is not long • Never try repair the TV yourself!
enough, use an appropriate plug adapter or extension - If the problem cannot be solved in "Troubleshooting" unplug the power
cable. (Consult your retailer) cord and contact your retailer.
• Unplug the power cord when going out! • Never insert the power cord by wet hand!
- The power buttons on the remote control and the TV unit - It may cause a fatal electric shock.
cannot completely turn off the TV. (Make appropriate • Keep the TV set away from direct sunlight!
arrangements for bedridden people.)
- TV set can be damaged.
• Do not allow the TV to fall!
• Place the TV set in a neat and dry place. Do not place the
- Do not rest your elbows on, or allow children to hang from the TV.
product close to source of steam, heat, moisture or oil.
- There is a risk that the TV will fall and cause injuries.
Because it may cause a fire hazard or electric shock hazard!
- Make use of the hole on the back of the stand to prevent the TV from
• Don't touch an external metal part of the TV set!
falling easily.
- It may cause an electrocuted.
• If the TV is damaged or behaving strangely, stop using it at
• If a television is not positioned in a sufficiently stable
once!
location, it can be potentially hazardous due to falling. Many
- Unplug the power cord and contact your retailer.
injuries, particularly to children, can be avoided by taking
• Never place anything on the TV!
simple precautions such as:
- Placing liquid, naked flames, cloths, paper, etc.
- Using cabinets or stands recommended by the manufacturer of the
on the TV may cause a fire.
television.
• Never expose to rain or moisture!
- Only using furniture that can safely support the television.
- To prevent fire or electric shock, never allow
- Ensuring the television is not overhanging the edge of the supporting
liquids to enter the unit.
furniture.
• Never insert objects into the cabinet
- Not placing the television on tall furniture (for example, cupboards or
openings!
bookcases) without anchoring both the furniture and the television to a
- It may cause a fatal electric shock.
suitable support.
- Take care when children are near.
- Not standing the television on cloth or other materials placed between
• For more details on installation, usage and safety ➔ Consult your the television and supporting furniture.
retailer. - Educating children about the dangers of climbing on furniture to reach
the television or its controls.
Care when setting
9 Power requirements
200 mm
• Connect the power cord only to a 110-240V,
50/60Hz AC outlet.
9 Installation requirements
•
To avoid overheating, ensure the unit has ample
room.
150 mm 50 mm 150 mm 50 mm
ENGLISH
Set Up and connections
GGT0339-001B-H
0510SCT-NF-MT
VIDEO-2
Component input Composite input
VIDEO-2 VIDEO-2
Y/ Y/
V V
Pb L Pb L
Pr R Pr R
Game Video
DVD Player
VCR
Remote control buttons and functions
Clear SD
1 2 3
ZOOM
4 5 6
7 8 9
RETURN + ECO
0
TV/VIDEO MENU
OK
DISPLAY BACK
CHANNEL MODE VOLUME
RM-C2020
LCD
• To prevent the TV from falling thread the belt
through the hole on the back of the stand and
secure it to the TV rack.
Hole for belt
• Insert the batteries
Use two "AAA/R03" dry cell batteries.
Insert the batteries from the · end,
Belt
making sure the · and ª polarities are
(not provided)
correct.
Screw (not provided)
1
DVD player
(HDMI compatible)
HDMI
PC
PC
PC IN
(D-SUB)
VIDEO-2 VIDEO-1
HDMI Analog /
Y V
V
DVI Analog / PC Audio
Pb L L
VIDEO-1
Pr R R
Game consoles Video camera
VCR
(DVD Player)
To VIDEO-1
VCR (DVD player)
To VIDEO-1
Adjust Volume
1 Power On / Off ! Volume control / Turn off muting
VOL VOL 2 Color buttons • When press and hold the button for 3 seconds,
3 Turn on "Clear SD" on-screen menu will be displayed.
4 Turn on "Zoom" • To exit, press and hold the button again for
5 Turn on "Eco Mode" 3 seconds.
CH
CH 6 To Teletext " View the Teletext
7 Display on-screen menu # Change channel / Page / Hyper Scan
8 Operate the menu $ Channel information
9 To previous screen % Switch between TV / Video input
& Return Plus / Return function
( Turn the volume off / on
) Change channel / page
Zoom : Change the aspect ratio
V-Scroll
• When 720p or 1080i or 1080p
Zoom 1. Select
signal is received, "Full" and
Auto Regular
Regular 16:9 Zoom
"Slim" can be selected.
14:9 Zoom OK
16:9 Zoom • In PC mode, "Regular" and
2. Set
16:9 Zoom Subtitle
"Full" can be selected.
Full
Move the picture with 3 or 4
while this bar is displayed.
Hyper Scan :
Press and hold . PR changes without changing the picture screen.
Once you release the button, the picture of the selected PR will appear.
Return Plus : Return to the frequently viewed channel.
Return Plus Programmed by select the frequently viewed channel then press and hold
RETURN+
Return Plus Canceled by press and hold .
Return : Return to the previously viewed channel.
"AAA/R03"
Batteries WARNING:
If this symbol is shown,
Batteries shall not be exposed
it is only valid in the
to excessive heat such as direct
European Union.
sunshine, fire or the like.
Initial Settings
1 2
Turn on the TV. Select a language.
MENU
Set Up
> Language
JVC logo appears English
• Show only when powering on for the first time.
Français
Українська
• The power on the unit can also be used.
• The select the new Country Area after Initial Setting has completed.
(While the cursor is pointing to Picture
1
menu and hold for 3 seconds.)
AERIAL
If you select Country Area to "Area-1"
4.
Select the teletext language group.
1. Select
Set Up
> Teletext Language
Group-1 OK
Group-2
Group-3
Group-4
Group-5
5.
Automatically register channels (Auto Program).
OK Set Up
> Auto Program
CH 40
5%
6.
Check what was registered.
OK
Set Up
OR > Edit
PR ID CH / CC
01 CH 02
02 CH 05
• If you want to edit channel, follow Edit
03 BBCABC CH 47
04 ABCDEF CH 09
05 CH 11 function in Set Up menu.
06 CH 07
07 CH 28
08 CH 32
09 CH 12
10 CH 03
Using the TV's Menu ---> Area - 1
Display MENU.
1 / 2 Select Main menu.
(Picture / Sound / Features / Set Up)
3 / 4 Select sub menu.
Picture
Picture Mode Soft 1 / 2 Change setting.
Backlight
Contrast
When 2 is shown.
Brightness
Sharpness
2 Display function setting.
Colour
Tint
White Balance Warm 3 / 4 Select function.
Features
1 / 2 Change setting.
or Exit from Menu. Confirm after setting.
OK
• Please see "Menu operation guide" at the bottom of menu on-screen.
Picture Mode Select the picture as you like.
(Standard / Soft / Bright)
Backlight Darker <--> Brighter
Lower <--> Higher
Contrast
Darker <--> Brighter
Brightness
Sharpness Softer <--> Sharper
Colour Lighter <--> Deeper
Tint Reddish <--> Greenish *Only NTSC
White Balance Select the white balance of the picture.
(Cool / Mid / Warm)
Features Clear SD For clearly picture
RETURN+
.
(Off / Mode-1 / Mode-2)
Colour For natural - looking pictures.
Management
(Off / On)
Picture Fix bright / dark pictures.
Management
(Off / On)
Colour Select an appropriate color system.
System (Auto / PAL / SECAM / NTSC 3.58 /
NTSC 4.43 / PAL-M / PAL-N)
Zoom Change the aspect ratio.
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
/ 16:9 Zoom Subtitle / Full)
2
3
Select Country Area.
1. Select Set Up 1. Select
> Country Area
ไทย
Area - 1
Tiếng Việt OK Area - 2 OK
Português
2. Set 2. Set
Melayu
Pусский
Castellano
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
If you select Country Area to "Area-2"
4.
Select Air or Cable.
1. Select
Set Up
> Auto Program
OK
Air
Cable
2. Set
5.
Searching for the channels (Auto Program)
Set Up
>> Auto Program
CH 40
5%
6.
Check what was registered.
OK
Set Up
> Channel Summary
CH / CC ID Skip
CH 02 Yes
CH 03 Yes
• If you want to set undesired channels
CH 04 BBCABC Yes
CH 05 ABCDEF Yes
CH 06 Yes to be skiped, follow Channel Summary
CH 07 Yes
CH 08 Yes
function in Set Up menu.
CH 09 Yes
CH 10 Yes
CH 11 Yes
Stereo / I II
Select the stereo, mono or bilingual language.
9
(I / II / O / m / Mono )
Bass Weaker <--> Stronger
Treble Weaker <--> Stronger
Surround Ambient sound (Off / On)
Balance Left Stronger <--> Right Stronger
Al Volume Prevent sudden increase or decrease of sound.
(Off / On)
Turns on the TV from standby mode.
On Timer
PR Select a channel. (01 - 99)
On Timer Set a time. (00:00 - 12:00)
Sleep Timer Turns off the TV to standby mode.
(Off / 10 / 20 / ...120)
Blue Back Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2)
Auto Program Automatically registers channels.
Edit / Manual Move Move a channel position by 2
and Adjust by 3 / 4.
ID (Red)
Edit a channel name by .
Insert (Green)
Insert a channel by .
Select a CH/CC by 3 / 4.
Enter number by 0-9 buttons.
Delete (Yellow)
Delete a channel by .
Manual (Blue)
Register a new channel by .
(Red) (Green)
Beginning channel search by and .
(Yellow)
(Blue)
Channel fine tunning by and .
If the picture or sound is unnatural by
for select a system.
Language Select your desired on screen display language.
Video-2 Setting Switch between video and component signal.
(Video / Component)
Teletext Select Teletext language group.
Language (Group-1/ Group-2/ Group-3/ Group-4/ Group-5)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input.
(Auto / PC Position / Phase / Pixel)
(continued)
3