Set Lock Code - JVC LT-17X576 Instructions Manual

Jvc lcd flat television instructions
Hide thumbs Also See for LT-17X576:
Table of Contents

Advertisement

INITIAL SETUP
Note:
If you want to change the setup, move the cursor to
the top column and change the lock icon to " - " by
pressing or again. You may then select indivual
categories to block.
Movies Ratings :
• NR - Not Rated
This is a film which has no rating. In many cases these films
were imported from countries which do not use the MPAA
ratings system. Other NR films may be from amateur producers
who didn't intend to have their film widely released.
NR (Not Rated) Programming may contain all types of
programming including children's programming, foreign
programs, or adult material.
• G - General Audience
In the opinion of the review board, these films contain nothing in
the way of sexual content, violence, or language that would be
unsuitable for audiences of any age.
• PG - Parental Guidance
Parental Guidance means the movie may contain some contents
such as mild violence, some brief nudity, and strong language.
The contents are not deemed intense.
• PG -13 - Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of
movies with this rating may include more explicit sexual, language,
and violence content than movies rated PG.
• R - Restricted
These films contain material that is explicit in nature and is not
recommended for unsupervised children under the age of 17.
• NC-17 - No One Under 17
These movies contain content which most parents would feel is
too adult for their children to view. Content can consist of strong
language, nudity, violence, and suggestive or explicit subject matter.
• X - No One Under 18
Inappropriate material for anyone under 18.
1 Select SET MOVIE RATINGS and press the
buttons to turn on or turn off the lock.
SET MOVIE RATINGS
X
NC-17
_
_
20
R
PG-13
PG
G
NR
_
_
_
_
_
FINISH

SET LOCK CODE

Channel guard and V-Chip settings are protected by a four-
digit lock code. Your TV comes preset with a lock code of
"0000". You may change the code to any four-digit number
you wish.
1 Select SET LOCK CODE and press 0 to enter the
the SET LOCK CODE setting menu.
2 Press the
and press the
move to FINISH and press OK to save settings
and exit.
When a viewer attempts to watch a blocked channel, this
message appears:
/
The channel will remain blocked until the correct lock code
is entered.
LOCK CODE
0 0 0 0
FINISH
/
buttons to move to the next digit
to select the number. Then
/
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lt-23x576

Table of Contents