Inserting Your Sim Card; Installing The Battery - O2 Xda Guide Quick Start Manual

Inserting your sim card

Before you start using your Xda Guide you'll need to insert your sim card. This contains
your mobile phone number.
Make sure the Xda Guide is turned off.
Remove the back cover by using your thumb or finger to
lift it from the bottom.
Remove battery. Look for the sim card slot (top right of
the space) and place the sim card in it with the gold
contacts facing down and the cut-off corner matching
the shape of the slot.
Slide the sim card completely into place.

Installing the battery

Line up the battery's copper contacts with the connectors in
the battery compartment and push it into place.
Make sure that the free end of the ribbon is showing above the
battery (you will use this to pull the battery out again when you
need to).
Replace the back cover.
6