VS-70 Simple Trouble Shooting Guidelines
Malfunction,
warning image
Water temperature too high
Machine overheating
Abnormality in the electrolytic cell
Increase water flow
Decrease water flow
The cause for malfunction and trouble
shooting method
The water temperature from the water input is
too high.
Turn the water off immediately, and make sure
the water from the intake is below 40 degrees C
before using.
Machine's temperature too high.
Please shut down the machine and rest for 30
minutes before reusing. If the machine doesn't
start-up again, contact your retail service center
to handle it.
1, excessive current.
2 .no electric current coming out
(electrolytic cell protection device).
please contact your retail service center
to handle it.
input water flow is too weak. Increase the water
flow and adjust the valve on the water faucet.
input water flow is too strong. Decrease the water
flow and adjust the valve on the water faucet.
23
Need help?
Do you have a question about the Under-Counter Alcaline Water Ionizer and is the answer not in the manual?