Functions Page 11~13 - Chanson Water Under-Counter Alcaline Water Ionizer User Manual

VS-70 Functions
Operation Guidelines
1.Power Saving and Sleeping Mode Functions
A In order to save power
When one finishes the operation (i.e. turning off faucet), the power
indicating lamp and LCD screen will automatically switch off after one minute.
B Resetting to Clock Display
When one is resetting the system to the standby mode (Clock Display Mode),
please press the "Power" key once; the power indicator will be on with red,
it is entering standby mode and the clock runs. If there is no further instruction
given, the indicator will automatically switch off one minute later.
C Turning on the faucet
When one is going to operate (i.e. opening the faucet), please press the
"Power" key twice, the water is turned on.
2.When you want drinking water, please press the water on/off button. at this time
the water indication light will turn "purple". Then you are able to get water when
the light turns " blue".
3.When you turn on the water each time, (if the water quality is not locked ) the
water level will be set at "standard alkaline". If you wish to adjust the water
level, you can press the "+ -" button to select your desired water level and then
press the "ok" button to get the water.
4.When you want turn the water off, press the water on/off button to shut the water
off. At the same time the power light will turn red, and be on hold.
VS-70 Functional Directions
Hot-Key Operation Instructions of pH-value Fine-Tuning
Function direction
The function can micro adjust the pH value in the water. For example If your
water level is set at " standard alkaline " and the default setting of the machine
is at pH9.5 and you wish to increase or reduce the value, you can use the
hot-key to adjust the pH value. The range of micro-adjustment is from 0.1 to 0.5.
Operation direction
1.Press the water on/off button to eject water. Then wait until the water indicator
light is on "blue"to press the "function" button to enter the menu.
2.Press the "+-" button to select the "pH set" screen.
3.Please press the "OK" button again to use the "+-" button to increase or
decrease the pH value.
4.After adjusting the pH value you want, then press the "OK" button to complete
the setting.
(Under the circumstances of water being available)
11