Aux Functions - Mackie tt24 Owner's Manual

Mackie TT24 Digital Live Console Owner's Manual
6. Use the 12 QuickMix knobs to adjust the dynamics parameters.
Touch the Gate or Compressor Touchscreen graph to display their more
detailed Touchscreen.
7. Press the GRP/AUX QuickMix button to display the GRPS/AUXES
Touchscreen (Figure 2-8).
8. Route the selected channel to Groups 1–8, L/R, and C/Mono by selecting
their buttons from the GROUPS area in the top-half of the Touchscreen.
9. Adjust the selected channel's Aux send levels using the QuickMix knobs.
10. Push the QuickMix knobs to toggle each Aux send between pre - and
post - fader.
2.4

Aux Functions

This section discusses how to setup, route, and mix the Aux buses. Each of the
12 Aux masters have their own EQ and compressor/limiter.
1. Press the AUX MSTR button (Figure 2-4) to display the AUX MASTER
Touchscreen.
2. Select Aux master 1 by pressing the top - left QuickMix knob.
Figure 2-9 (left) shows Aux 1 selected.
3. Touch the EQ graph or press the EQ QuickMix button to display the
6 - BAND EQ for the selected Aux send 1 (right of Figure 2-9).
The EQ IN/OUT button is located on the top-right of the Touchscreen.
Figure 2-8 GRPS/AUXES Touchscreens
19
Quickstart Tutorial