Mackie TT24 Digital Live Console Owner's Manual
Chapter 2: Quickstart Tutorial
This Quickstart Tutorial will help you begin using the TT24 quickly and easily
by providing step - by - step instructions for its most commonly utilized tasks.
Rest assured that our team of design engineers has verified these instructions!
It may be helpful to refer to Appendix B:
to see how several useful complete systems are interconnected.
2.1
Connect Amplifier/Speakers
1. Plug in a pair of amps/speakers into the MAINS OUT LEFT and RIGHT
XLR connectors (Figure 2-1).
2. Connect an amp/speaker to AUX SEND 1.
3. Plug in headphones.
MAINS OUT
LEFT
RIGHT
C
CTR/MONO
Main Outputs
2.2
Connect a Mic
This section describes how to connect a mic to channel 1, set the gain, route to
groups/auxes, and engage/adjust the variable high - pass filter.
Connect mic to channel 1
1. Plug a mic into channel 1's XLR input (top - right of rear panel).
2. Press the ANLG bank select button (right of Figure 2-2).
3. Set the LINE switch to the up (mic) position.
TALKBACK
CD/TAPE A
L
12
11
R
IN
OUT
L
R
CD/Tape A
CD/Tape B
Inputs/Outputs
Inputs
Figure 2-1 Mains and Aux Sends Outputs
Configurations and Block Diagrams
AUX SENDS
10
9
8
7
6
LINE INPUTS
8
7
6
5
4
13
5
4
3
2
1
MONITOR
3
2
1
L
R
12 Aux
Sends
M