Mackie TT24 Diagram

Analog Channels 1-24

48V
Clip
Sig Channel Processing Analog Channel 1
Gain
(=Analog 2-24)
Digi Insert
2
+
MIC 1
ADC
-
3
Mic: 0 to +60 dB Meter
Line: Ð20 to +40 dB
LINE
INSERT
Digital Channels 1-24 @48Khz, 1-12 @96Khz
Digi Insert
ADAT
ADAT 1 (= ADAT 2-24)
To Level, Pan & Group Assign
IN (x3)
Meter
Adat I/O Expansion Card In Slot A Or B
Digital Channels 13-24 @96Khz
Digi Insert
ADAT
ADAT 13 (= ADAT 14-24) To Level, Pan & Group Assign
IN (x3)
Meter
Line Input 1 Processing
Line Input 1
(=Line Input 2-8) (=Line Input 2-8)
+
LINE
To Level, Pan & Group Assign
ADC
-
Trim 3-Band
Meter
Para EQ
Optional Stereo Link in Pairs
All processing parameters linked.
To Level, Pan & Group Assign
Select Aux1-12/Matrix1-8
To Level, Pan & Group Assign
To Level, Pan & Group Assign
Select Aux1-12/Matrix1-8
Internal Effects
To Level, Pan & Group Assign
Processor
To Level, Pan & Group Assign
(IFX)
Select Aux1-12/Matrix1-8
To Level, Pan & Group Assign
To Level, Pan & Group Assign
Select Aux1-12/Matrix1-8
To Level, Pan & Group Assign
SRC
Bypass
SPDIF IN
2 RX SRC
AES/EBU IN 1
3
Monitor Sel
TAPE-A IN L
ADC
TAPE-A IN R
ADC
Monitor Sel
TAPE-B IN L +
ADC
-
Monitor Sel
TAPE-B IN R
Monitor Sel
+
ADC
-
Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign Digi Insert Send
Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign Digi Insert Send
Slot A only
Select Aux1-12/Matrix1-8
To Level, Pan & Group Assign Digi Insert Send
or
Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign Digi Insert Send
Slot B only
Select Aux1-12/Matrix1-8 (with UFX-II To Level, Pan & Group Assign Digi Insert Send
or I/O as Effects
Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign Digi Insert Send
Processors)
Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign Digi Insert Send
Select Aux1-12/Matrix1-8
To Level, Pan & Group Assign Digi Insert Send
Note: There are only 2 expansion Slots: Slot A and Slot B. UP to 2 network cards installed
(max 1 as network, max 1 as console linker), maximum of 1 UFX-II card or I/O card
configured for effects returns, maximum of 1 ADAT card installed as 96kHz digital
channels 13-24.
Up to 2 UFX-II or I/O cards configured for inserts.
MACKIE TT24 BLOCK DIAGRAM
MACKIE
TT24: STEREO+MONO MODE
COPYRIGHT 2004, LOUD TECHNOLOGIES INC.
BLOCK DIAGRAM
(#070604_GJ/DF)
ALL RIGHTS RESERVED
Channel 1 Level, Pan & Group Assign
(=Analog 1-24, Digital 1-24, Line input 1-8, IFX Ret 1-8,
Slot A Ret 1-8)
Solo
Reversible
Digi Insert
Mute
Pan
Trim Phase High Pass Gate 4-Band Comp
Fader
Para EQ
Optional Stereo Link in Pairs
All processing parameters linked, and true stereo compression.
Aux 1 (=Odd#Aux)
Pre/Post
Fader
Linked if Linked if
Aux 1/2 Aux 1/2
is stereo is stereo
Aux 2 (=Even#Aux)
Pre/Post
Fader
Optional Stereo Link in Pairs
All controls directly linked, but pans linked inversely, with initial setting of full L
on odd channel, and full R on even channel (same applies to aux send pan).
Sig/Clip
Matrix 1 Assgn
LEDs
(=Mat 2-8)
2 Talk
TALKBACK Aux 1 Assgn
1 (=Odd#Aux)
ADC
MIC
Linked if Aux
Aux 2 Assgn
1/2 is stereo
3
(=Even#Aux)
Monitor Sel and any Digital Insert Return
Monitor Sel and any Digital Insert Return
Stereo
Select
Meter
Solo
Mute
Meter
LR Assgn
Stereo Level
Digi Insert Return
Digi Insert Return
Slot A
Slot A only 24 Signals
Digi Insert Return
24 Signals - Selectable
and/or
(e.g. Replace built-in inputs
(e.g. Analog 1-24 pre- or or
Digi Insert Return Analog 1-24 or Digital 1-24,
Slot B
post-processing, Digital 1-
Slot B only replace ouptuts, send to
24 outputs, digi inserts etc.)
(with UFX-II Digi Insert Return
Digital out, digi inserts, etc.)
(with Audio
or I/O as
Network Card)
Digi Insert Return
Inserts)
Digi Insert Return
Digi Insert Return
Aux 1/2
Grp 1
(= Aux 3-12 in
pairs) (= Grp 2-8)
1 2 L R M L R
C Assgn
LR Assgn
Grp 1Assgn Grp 1 Type
(=Grp 2-8)
(=Grp 2-8) Note: A maximum of 8 channels of processing can be assigned at once accross all
groups. Mono = 1 channel, Stereo = 2 channels.
Group 1 as Mono (=Group 2-8 as Mono)
Assignable Processing
Reversible
Mono
Mute
Group
Pan
4-Band Comp
Fader
Para EQ
Pan
Group 1 as Stereo
(=Group 2-8 as Stereo)
Pan
Assignable Processing
Stereo
Reversible
Group Mute
4-Band Comp
Fader
Para EQ
Mono Aux 1 Processing Note: Only one Aux channel (mono
(=Aux 2-8)
or stereo) can be solo'd at once.
+
Reversible
Mono Digi Insert +Dual
to Mains Kill Filter
Mute
4-Band Comp
Fader
Para EQ
Stereo Aux 1/2 Processing
(=other Aux pairs as stereo)
Reversible
Digi Insert
+Dual
Mute
Kill Filter
4-Band Comp Fader
Para EQ
L R C L R L R
Movable
Digi Insert Digi Insert
+Dual
Kill Filter
4-Band Comp
Fader Fader
Para EQ
Digi Insert Digi Insert
4-Band
Digi Insert Fader Comp Fader Digi Insert
Para EQ
+Dual
Kill Filter
AFL/PFL
Solo
C Assgn
LR Assgn
Digi In L
Tape-A In L
Tape-B In L
Grp 1 Mono
Digi In R
Tape-A In R
Tape-B In R
Monitor
Sel
To Matrix
Solo
LR Assgn
Matrix Channel 1
(=Matrix 2-8)
C Assgn Matrix 1
+
Group/Matrix Out 1
(= Matrix 2-8)
Grp 1 Mono
Grp 1 R
Grp 1 L Solo
Group 1 Mono
Matrix 1
Group 1 Mono (default)
or From a Matrix+ selection
To internal FX
Group 2 Mono (default) and UFX-II
or From a Matrix+ selection (only availble if
matrix active)
Group 3 Mono (default)
or From a Matrix+ selection
Group 4 Mono (default)
or From a Matrix+ selection
Group 5 Mono (default)
or From a Matrix+ selection
Group 6 Mono (default)
or From a Matrix+ selection
Group 7 Mono (default)
or From a Matrix+ selection
Group 8 Mono (default)
or From a Matrix+ selection
Main L (default)
or From a Matrix+ selection
Main R (default)
Matrix+ Selections:
or From a Matrix+ selection
Any Grp Mono, L, R;
Main Out L, R, C;
Main C (default)
Analog/Digitla/Line
or From a Matrix+ selection
Channel Pre/Post Fader;
Stereo L /R pre/post
From Talkback fader.
Note: Matrix only available when activate.
Solo
Aux 1 Mono
Aux Send 1
Aux 1 Mono
Solo
Aux Send 2
Aux 1/2 Stereo L
Aux 2 Mono
Aux 1/2 Stereo R
2
+ LEFT OUT
1
DAC
–
3
2
1 RIGHT OUT
+
DAC
Soft Clip
–
3
CTR/MONO
2
+ 1
DAC
– OUT
3
Soft Clip
Digi I/O
is Insert
SPDIF OUT
Digi Insert Send
C
TX 2
1 AES/EBU OUT
Meter
Digi Insert Send
3
L
TAPE-A OUT L
DAC
Meter
TAPE-A OUT R
DAC
R
Meter
CUE
Solo
Level
DAC
MONITOR L
DAC
Soft Clip
MONITOR R
Solo
Control
PHONES
(=Group/Matrix Out 2-8)
Matrix Active
(ganged)
GROUP/MATRIX
2
+ 1
OUT 1
DAC
–
3
(=Group/Matrix 2-8)
Delay Soft Clip
Meter
Delay only available if
matrix active.

Digital Channels 1-24 @48kHz, 1-12 @96kHz

Digital Out Select
(ganged)
ADAT
Analog Ch1 Pre-Processing
ADAT 1
OUT (x3)
Analog Ch1 Post-Processing

ADAT I/O Expansion Card in Slot A or B

Digital Channels 13-24 @96kHz

ADAT
Analog Ch13 Pre-Processing
ADAT 13
OUT (x3)
Analog Ch13 Post-Processing
(=Odd#Aux Send 3,5,7,9,11)
Mono/Stereo
Link

AUX SEND 1

DAC
Soft Clip
Meter
To internal FX
and UFX-II
(=Even#Aux Send 4,6,8,10,12)

AUX SEND 2

DAC
Meter Soft Clip
To internal FX
and UFX-II