Samsung GT-S5260 Service Manual page 26

7. Level 2 Repair
5
Put KEY PAD on the Front Ass'y
1) Be care not to put KEY PAD on the front wrong
position and scratch.
7
1) Connect LCD FPCB and PBA
CONNECTOR
2) Assemble FRONT ASS'Y and PBA.
1) Be careful not to damage FPCB and components around
PBA.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Put KEY BRACKET on KEYPAD.
1) First, put on right side of KEY Bracket and push
left side of KEY Bracket along the Z axis.
8
1) Put MOTOR on the PCB and connect KEY
Connector..
1) Be careful not to damage MOTOR WIRE and FPCB
7-6