Installation; Install Decoderpro; Install S-Nano Usb Drivers; Drivers For Windows 2000, Xp Or Vista (With Some Variations)6 - Sprog S-Nano User Manual

S-Nano User Guide

Installation

The following steps are required to install S-Nano before you can use it for
the first time:
 Install DecoderPro 2.14 or later (Will also install the Java Runtime
Environment (JRE) if necessary)
 Install S-Nano USB drivers
 Edit DecoderPro preferences
 Connect the booster
This document gives brief installation instructions for the Windows Operating
System, versions 2000, XP or 7, or for MacOS 10.4 and newer. For further
instructions and for instructions to install the JRE and DecoderPro on Linux,
please refer to the Install Guides on the JMRI website at
http://jmri.sourceforge.net/download

Install DecoderPro

DecoderPro should be installed from the CD-ROM or a downloaded copy.
The CD includes the latest production version at the time of supply.
A newer version of DecoderPro than that supplied on the CD-ROM may be
available from the JMRI download page
This user guide assumes you are using version 3.0, or later.
To install from the CD-ROM, browse to the directory specific to your operating
system to find the JMRI installer. For example, if your CD-ROM drive is D: on
Windows, double click on the file D:\Windows\JMRI.3.0-r20870.exe.

Install S-NANO USB drivers

Use the supplied USB cable to connect S-NANO to the host computer. The
power LED should be lit.
There are four possible choices set out below, for earlier Windows systems,
Windows 7, MacOS 10.4 and later, or Linux. Select the right section for your
computer and operating system.
Drivers for Windows 2000, XP or Vista (with some variations)
The first time you connect the S-Nano you should see the "Found new
Hardware Wizard". Follow the steps below to install the S-NANO drivers.
Version 1.0 Oct 2012
http://jmri.sourceforge.net/download
© Copyright 2012 SPROG DCC
6