Send Command; Selecting Sprog Operating Modes; Speed Step Modes; Current Limit - Sprog S-Nano User Manual

S-Nano User Guide
The "Add Message" field can be used to add annotations to the command
history.

Send Command

The "Send Command" field provides the same functionality as the basic Send
command utility available on the SPROG menu. Enter a command in the
Command field and press return on the keyboard or click the send button to
send the command to the S-Nano.

Selecting SPROG Operating Modes

After changing any of the following modes, you should use the "Save" button
!
to store the changes in the S-Nano.

Speed Step Modes

Not applicable for S-Nano.

Current Limit

Not applicable for S-Nano.

Set ZTC Mode

Not applicable for S-Nano.

Set Blueline Mode

Not applicable for S-Nano.

Unlock Firmware

Select this option if you are about to update the S-Nano firmware using the
bootloader. This mode is automatically canceled when the power is removed
from the S-Nano.

Save

Always click this button after selecting a new mode. The selected modes
(apart from "Unlock Firmware") will be stored in the S-Nano, so that they are
effective each time you use your it, even after the power has been removed.
Version 1.0 Oct 2012 © Copyright 2012 SPROG DCC
27