HIKVISION DS-2CD886BF-E Installation Manual page 11

Installation Manual of Network Box Camera
3
4
5
6
7
8
9 Power LED indicator, which turns red when power is applied to the unit
10
11
12
13
NOTE:
When the camera is power up, press the 'RESET' button for about 10 seconds, then all
parameters, including user name, password, IP address, port number, etc., will be
reset to the factory default settings.
Rear Panel of DS-2CD886MF-E and DS-2CD876MF:
Serial NO.
1
2
3
4
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
D+,D-: RS-485 interface
10M / 100M self-adaptive Ethernet interface
Video output interface
RESET: Reset all parameters to factory default settings
TXD , RXD,GND: RS-232 interface
Power supply
SD card slot
Audio input interface
Audio output interface
Description
ALARM OUT, GND: Alarm output interface
ALARM IN, GND: Alarm input interface
D+, D-: RS-485 interface
TXD , RXD,GND: RS-232 interface
HDMI interface
Ground
4