Table of Contents
Advertisement
nokia
C
P
ONNECTING
EOPLE
Nokia Mobile Phones Customer Care EMEA
Technical Services, Repair Concepts
The purpose of this document is to help Nokia service levels 1 and 2 workshop
technicians to carry out service to Nokia 2100. This Service Manual is to be used only by
authorized Nokia service partners, and the content of it is confidential. Please note that
Nokia provides also other guidance documents (e.g. Service Bulletins) for service
partners, follow these regularly and comply with the given instructions.
While every endeavor has been made to ensure the accuracy of this document, some
errors may exist. If you find any errors or if you have further suggestions, Nokia should
be notified. Please keep in mind also that this documentation is continuously being
updated and modified, so watch always out for the newest version.
Warnings and Cautions
Please refer to the phone's user guide for instructions relating to operation, care and maintenance
including important safety information. Note also the following:
Warnings:
1.
CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE
MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT
CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE
VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC
SYSTEMS TO RF ENERGY.
2.
THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN
POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING
AREAS ETC.
3.
OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY
INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT
A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS.
OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.
Cautions:
1.
Servicing and alignment must be undertaken by qualified personnel only.
2.
Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is
worn.
3.
Ensure solder, wire, or foreign matter does not enter the telephone as damage may result.
4.
Use only approved components as specified in the parts list.
5.
Ensure all components, modules screws and insulators are correctly re–fitted after servicing and
alignment. Ensure all cables and wires are repositioned correctly.
6.
All PC's used with NMP Service Software for this produce must be bios and operating system "Year
2000 Compliant".
Service Manual 2100 Level 1&2
PAGE 2 (17)
Confidential
INTRODUCTION
Copyright 2002-2003 © Nokia Corporation
Approved 1.0
SQX 00617-en DJK
17.03.2003
Advertisement
Table of Contents
