Figure 14 Sim/Sam Cardholder Locking-Clasp - Lipman NURIT 8000 Installation Manual

Figure 14 SIM/SAM Cardholder Locking-Clasp

5. Lift the cardholder on its hinge to an
upright position.
6. Hold the SAM or SIM card so that its chip
side is facing down towards the contacts
on the reader.
7. Insert the SAM or SIM card into the
cardholder.
Note
Make sure that you first slide the
end closest to the chip on the card
into the grooves of the holder.
Installation Manual 41