Initial Setup; Unpacking The Box; Figure 2 Secure Device Label - Lipman NURIT 8000 Installation Manual

Initial Setup

Unpacking the Box

To unpack the box:
1. Place the box right side up on a stable, flat
surface.
2. For secure models of the NURIT 8000,
verify that the Secure Device label that
seals the box is intact.
Figure 2 Secure Device Label
Caution
If the Secure
damaged or missing, do not open the
box. This could be an indication of
device tampering and may affect the
validity of the warranty for the
device. Notify
distributor.
3. For secure models of the NURIT 8000, peel
off or cut through the Secure Device label.
4. Open the front flap of the box.
5. Open the top cover of the box.
Installation Manual
Device label is
your Lipman
13