Set Up And Connections - JVC GGT0359-001A-H Instructions Manual

Set up and connections

Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights while
the TV is on.
•
"Power Lamp" (P. 15)
Remote control sensor /
Eco Sensor
Care when setting
■
Power requirements
•
Connect the power cord only to a
110-240V, 50/60Hz AC outlet.
■
When attaching the TV to the
wall, use the optional JVC wall
mounting unit
•
Consult a qualifi ed technician.
•
JVC assumes no responsibility for
damage due to improper mounting.
•
400 mm x 200 mm mount which
conforms to VESA standards.
■
Installation requirements
•
To avoid overheating, ensure the
unit has ample room.
200 mm
150 mm 50 mm 150 mm 50 mm
4
Select the input Source (P. 20)
TV/VIDEO
MENU/OK
Display on-screen menu / set
Change channel / Page /
CHANNEL
Hyper Scan Function (P. 3)
Volume / Adjust
VOLUME
Power On / Off
Microphone
•
If the microphone is installed,
should be lock it's cable follow
picture.
•
To prevent the TV from falling
thread the belt through the hole
on the back of the stand and
secure it to the TV rack.
Hole for belt
(under the stand)
Screw for
attach the belt
to the stand
Screw Belt
(provided)
(not provided) (provided)
Connect an aerial and VCR / DVD Player
VIDEO-2
R L V
VCR (DVD Player)
Stand Assembly
1 4
5
2
6
3
AERIAL
OR
•
After all the connections have
been made, insert the plug into
an AC outlet.
Change the direction of TV