Set Up And Connections - JVC GGT0220-001A-H Instructions Manual

Set up and connections

Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights
while the TV is on.
• "Power Lamp" (P. 13)
Remote control sensor
Care when setting
Power requirements
■
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
When attaching the TV to the wall, use the optional JVC wall
■
mounting unit
• Consult a qualified technician.
• JVC assumes no responsibility for damage due to improper mounting.
• 200mm x 200mm mount which conforms to VESA standards.
Installation requirements
■
• To avoid overheating, ensure the unit has ample room.
200mm
150mm 50mm
4
Switch between
TV/VIDEO
TV / VIDEO devices
MENU/OK
Display on-screen menu / set
Change channel / Page /
CHANNEL
Hyper Scan Function (P. 3)
Volume / Adjust
VOLUME
Power On / Off
To Headphone (P. 5)
150mm 50mm
Connect an aerial and VCR / DVD Player
VIDEO-2
R L V
VCR (DVD Player)
• After all the connections have been made, insert the plug into an
AC outlet.
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.
1
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
AERIAL
OR
2