Main Features Explained - CyClone 866F Owner's Manual

Main Features Expl ained
• Digital Tilt Sensor
When armed, system records bike inclination on two separate axis. If bike is
then tilted ±3° or more on either axis, the siren will be triggered. Note that the
siren may trigger even when bike has not been tilted due to the shock sensor.
• 2-Stage Shock Sensor
When armed, system can be set to trigger Warning Chirps and/or Full Siren
Blast based on the level of shock to the bike. Sensor 1st and 2nd stage triggers
are user-adjustable, and either setting or both can be turned completely off.
• Starter Immobilizer
Used to cut ignition or fuel lines when system is Armed (optional in Sleep).
• Panic Siren
Allows siren to be activated via transmitter to alert others in an emergency.
• Sleep Mode
Shuts down most functions to conserve power. Useful to prevent battery
drain when bike not used for extended periods. Also acts as a Valet mode.
• Silent Mode
Disables full siren blast (allows Warning and Confirmation chirps). Useful in
combination with optional pager to learn of threats without alerting thief.
• Manual Disarm
Enables you to disarm the system without the transmitter simply by turning
the ignition key on/off a certain number times (a number which you program).
• Auto Arm
Automatically arms system 5 min. after ignition goes off. Auto Arm cannot be
disabled; however, you can control which sensors are active during Auto Arm.
• Sector Bypass System (SBS)
Prevents siren from becoming a public nuisance. Shock, tilt or ignition sensors
will be individually bypassed if they trigger 5 times. You can disable this feature.
• Siren Trigger Memory
When you disarm, system informs you (via siren chirps and LED flashes) if
the siren went off in your absence.
© 2 0 0 6 A L L R I G H T S R E S E R V E D .